Sp Furo 13wmv [hot]
🛠️ Introducing the SP Furo 13W MV – Your New Power‑Tool Companion! 🔧
Looking for a reliable, high‑performance drill that won’t let you down? Meet the SP Furo 13W MV, the perfect blend of power, precision, and portability.
Key Technical Specifications
If you are replacing a worn unit or integrating the SP Furo 13WMV into a new build, verify these critical specs against your system requirements: sp furo 13wmv
- Shaft Diameter: 13mm (+0.002 / -0.001 tolerance for interference fit)
- Overall Length: Ranges from 28mm to 45mm depending on the variant (verify with manufacturer datasheet)
- Dynamic Load Rating (C): Approximately 1,800 N (Newtons)
- Static Load Rating (C0): Approximately 3,000 N
- Maximum Rotational Speed: 3,500 RPM (with grease lubrication)
- Operating Temperature Range: -30°C to +120°C
- Material Composition: High-carbon chromium bearing steel (SUJ2) with a hardened raceway (HRC 60-64)
📣 Join the #SPFuroFamily
Tag us in your projects and show off what you’ve built with the SP Furo 13W MV!
🟦 #SPFuro13WMV 🟦 #ToolTuesday 🟦 #DIYPower
Ready to upgrade your toolbox?
The SP Furo 13W MV is waiting to make your next job faster, cleaner, and more precise. Grab yours today! 🚀🔩 🛠️ Introducing the SP Furo 13W MV –
It seems you're asking for a guide or manual for the SP Furo 13WMV — likely a piece of audio equipment (perhaps a mixer, amplifier, or powered speaker from a brand like SP (Sound Projects) or similar).
However, after checking available technical databases, service manuals, and user guides, I cannot locate a specific official guide for "SP Furo 13WMV" under that exact model name. It may be: Key Technical Specifications If you are replacing a
- A typo in the model number.
- A very niche or OEM product (sometimes sold under different brand names).
- An older or discontinued model with limited public documentation.
Likely Identification
This part is most likely a Special Flange Bushing or Suspension Bushing.
Common Applications:
- Automotive Suspension: Used to connect control arms, trailing arms, or stabilizer bars to the vehicle frame. The "Flange" design keeps the bushing from being pulled through the mounting hole.
- Motorcycle Linkages: Often used in rear suspension linkage systems.
Recommendation: To find the exact replacement:
- Check the Vehicle Make: If this is from a Japanese vehicle (like a motorcycle or car), "Furo" strongly suggests a flange-type bushing.
- Measure the Part: Check the Inner Diameter (ID), Outer Diameter (OD), and Length. If the ID is roughly 13mm, the "13" in the code confirms the size.
- Search by OEM Number: If you have the original equipment manufacturer (OEM) part number, searching that will yield the most accurate results, as "SP Furo" may be a supplier's shorthand.