The story of UNI ISO 4755 (often referred to in technical tables as the "Tabella Gola") is a tale of precision tucked away in the smallest of places: the thread undercut.
In the world of mechanical engineering, there is a recurring problem with bolts and screws. When you try to screw a bolt all the way into a flat surface, the threads often can't reach the very base of the head because of how the manufacturing tools work. Without a "gola" (the Italian word for "throat" or "groove"), the bolt won't sit flush against the surface. The Problem in the Workshop
Imagine a master machinist in 1980, struggling to seat a heavy-duty plug into a hydraulic manifold. Because the thread ended abruptly, a tiny ridge of metal prevented a perfect seal. This was a common headache until Technical Committee ISO/TC 2 stepped in to standardize the solution. The Birth of the Standard
In December 1981, the draft for what would become ISO 4755 began circulating among international member bodies. It was officially accepted in 1983 (and adopted as UNI ISO 4755 in Italy in 1986).
The "story" this standard tells is one of universal language. It dictates exactly how to carve a small groove at the end of an external metric thread so that:
The fastener sits flush: The undercut provides a "landing zone" for the tool, ensuring no stray metal interferes with the seating.
The stress is distributed: By standardizing the radius and depth of the groove, engineers can predict exactly how much load the bolt can handle without snapping at its weakest point. The "Tabella Gola" Today
Today, the Tabella Gola UNI ISO 4755 is the silent hero of assembly lines. It provides a simple lookup for dimensions like: : The diameter of the undercut. : The width and transition lengths of the groove.
Whenever you see a bolt that fits perfectly tight against a machine part, you are looking at the legacy of this 1980s standardization—a small groove that solved a massive industrial friction. ISO-4755-1983.pdf - iTeh Standards
The UNI ISO 4755 standard (equivalent to the international ISO 4755:1983) specifies the form and dimensions of thread undercuts (known in Italian as gola di scarico) for fasteners with external ISO metric threads. These features are typically used at the end of a threaded shaft to provide clearance for a cutting tool or to allow a mating component, like a plug, to sit flush against a shoulder. Key Technical Specifications
The standard provides a specific geometry for the undercut, including a minimum transition angle of 30∘30 raised to the composed with power . The dimensions are categorized by the thread pitch ( ), which dictates the undercut diameter ( ), length ( ), and radius ( Dimensions Table (Abridged)
Below are recommended dimensions for standard metric thread pitches according to ISO 4755: Thread Pitch ( Undercut Diameter ( Undercut Length ( Max Length ( 0.5 0.75 1.0 1.25 1.5 2.0 2.5 represents the nominal diameter of the thread. Usage Considerations
Design Purpose: Used where a full thread up to a shoulder is not possible or necessary. It ensures the mating part can be tightened without interference from the thread run-out.
Alternatives: If a specific product standard (e.g., for a particular type of bolt) defines different undercut requirements, those take precedence over ISO 4755.
Verification: This standard was last reviewed and confirmed in 2023, meaning the 1983/1986 versions remain current in industrial practice. ISO-4755-1983.pdf - iTeh Standards
La norma UNI ISO 4755 definisce dimensioni e forme delle gole di scarico per filettature metriche ISO esterne, con parametri che variano in base al passo del filetto. Queste geometrie, essenziali per la lavorazione, includono diametri ridotti (
) e larghezze specifiche per garantire il corretto posizionamento degli elementi di fissaggio. Per una guida dettagliata all'uso in officina, consultare l'estratto tecnico di WordPress.com UNI ISO 4755 - WordPress.com
La UNI ISO 4755 è la norma tecnica di riferimento che stabilisce la geometria e le dimensioni delle gole di scarico per la bulloneria e altri elementi con filettatura metrica ISO esterna. Questa lavorazione è fondamentale nella meccanica di precisione per permettere il corretto accoppiamento a battuta tra componenti filettati e per facilitare l'uscita dell'utensile durante la tornitura. Cos'è la Gola di Scarico UNI ISO 4755?
Una gola di scarico (o "scarico del filetto") è un'incisione anulare praticata alla fine di un tratto filettato, solitamente in corrispondenza di uno spallamento. Senza di essa, i filetti incompleti (filetti di uscita) impedirebbero a una madrevite o a un dado di avvitarsi completamente fino alla superficie d'appoggio.
La norma UNI ISO 4755 (corrispondente alla versione internazionale ISO 4755:1983) definisce una forma standard che ottimizza la resistenza meccanica e la facilità di produzione. Tabella Dimensionale UNI ISO 4755 (Estratto)
Le dimensioni della gola dipendono esclusivamente dal passo della filettatura (P). Di seguito sono riportati i valori principali per i passi più comuni: Diametro Gola ( Larghezza ( Larghezza ( 0,5 0,7 0,8 1,0 1,25 1,5 1,75 2,0 Legenda dei simboli: : Diametro nominale della filettatura. : Diametro del fondo della gola.
: Distanza minima tra l'ultimo filetto completo e lo spallamento. : Larghezza massima della gola (circa 3 volte il passo).
: Raggio di raccordo per evitare intagli che causerebbero rotture a fatica. Importanza nella Progettazione Meccanica ISO-4755-1983.pdf - iTeh Standards
Guida Definitiva alla Tabella Gola UNI ISO 4755: Dimensioni e Progettazione Nel mondo della progettazione meccanica, la gola di scarico
(thread undercut) è un dettaglio spesso sottovalutato ma fondamentale per garantire il corretto montaggio e la durata dei componenti filettati. La normativa di riferimento per le filettature esterne metriche ISO è la UNI ISO 4755 Cos'è la Gola di Scarico UNI ISO 4755?
La norma specifica la forma e le dimensioni delle gole di scarico per viti, bulloni e prodotti similari. La sua funzione principale è permettere a un componente accoppiato, come un tappo o una spalla rettificata, di andare a battuta perfettamente contro la faccia del pezzo, eliminando l'interferenza causata dal tratto di filetto incompleto. Tabella Dimensionale UNI ISO 4755 (Estratto) Le dimensioni della gola dipendono direttamente dal passo della filettatura (P) . Di seguito i valori principali espressi in millimetri: Diametro Gola ( Raggio (r)
: Diametro del fondo della gola (tolleranza h12 o h13 per diametri piccoli). : Corrisponde tipicamente a Angolo di transizione 30 raised to the composed with power Perché è fondamentale in officina? Montaggio a filo
: Senza la gola, la "fuga" del filetto impedisce al dado o alla flangia di toccare la spalla del bullone. Riduzione delle tensioni
: Una gola ben raccordata riduce l'effetto intaglio, migliorando la resistenza a fatica del componente. Lavorazione CNC
: Facilita l'uscita dell'utensile durante la tornitura o la rettifica. Differenza tra UNI ISO 4755 e DIN 76 ISO-4755-1983.pdf - iTeh Standards
The UNI ISO 4755 standard (equivalent to the international ISO 4755) specifies the required form and dimensions for thread undercuts on bolts, screws, and similar externally threaded products. These undercuts are used to provide clearance for tools during machining or to ensure a flush fit for mating components. Technical Specifications for Thread Undercuts
The standard provides specific dimensions based on the thread pitch (
). Below are the typical recommended dimensions in millimeters: Undercut Diameter ( Undercut Length ( 0.25 0.4 0.5 0.7 0.8 1.0 1.25 1.5 1.75 2.0 Table data based on standard ISO 4755 dimensions. Key Design Rules Undercut Length ( ): Generally calculated as approximately times the thread pitch ( Transition Angle: A minimum transition angle of 30∘30 raised to the composed with power is typically maintained for the undercut profile.
Application: These dimensions are recommended unless a specific product standard (like those for specialized shoulder screws) provides its own undercut requirements. ISO-4755-1983.pdf - iTeh Standards tabella gola uni iso 4755
La Tabella Gola UNI ISO 4755: Uno Strumento Essenziale per la Valutazione della Gola
La valutazione della gola è un aspetto fondamentale nella produzione di ruote dentate e ingranaggi. La gola, o la parte interna della ruota dentata, gioca un ruolo cruciale nella funzionalità e nell'efficienza dell'ingranaggio. Per garantire la qualità e la precisione delle ruote dentate, è stata sviluppata la tabella gola UNI ISO 4755, uno strumento essenziale per la valutazione della gola.
Cos'è la Tabella Gola UNI ISO 4755?
La tabella gola UNI ISO 4755 è un documento tecnico che fornisce le specifiche e le tolleranze per la valutazione della gola delle ruote dentate. La norma UNI ISO 4755 è stata pubblicata dall'Organizzazione Internazionale per la Standardizzazione (ISO) e adottata in Italia dall'Ente Nazionale Italiane di Unificazione (UNI). Questa tabella rappresenta uno standard internazionale per la valutazione della gola, consentendo ai produttori di ruote dentate di garantire la qualità e la precisione dei loro prodotti.
Contenuto della Tabella Gola UNI ISO 4755
La tabella gola UNI ISO 4755 contiene le seguenti informazioni:
La tabella fornisce anche una serie di formule e metodi per il calcolo delle dimensioni della gola e per la valutazione della sua precisione.
Importanza della Tabella Gola UNI ISO 4755
La tabella gola UNI ISO 4755 è uno strumento essenziale per la valutazione della gola per diverse ragioni:
Applicazioni della Tabella Gola UNI ISO 4755
La tabella gola UNI ISO 4755 trova applicazione in diversi settori industriali, tra cui:
Conclusione
In conclusione, la tabella gola UNI ISO 4755 è uno strumento essenziale per la valutazione della gola delle ruote dentate. La sua adozione garantisce la qualità e la precisione dei prodotti, favorisce la standardizzazione e riduce gli errori. La tabella gola UNI ISO 4755 trova applicazione in diversi settori industriali e rappresenta un riferimento importante per i produttori di ruote dentate e ingranaggi.
The UNI ISO 4755 standard specifies the form and dimensions of thread undercuts (Italian: gola di scarico) for fasteners with external metric ISO threads. These undercuts are essential for ensuring a flush fit when a screw or bolt is tightened against a surface, as they provide clearance for the non-threaded transition zone. 🛠️ Purpose of the Undercut
In manufacturing, a thread cannot be cut perfectly to the very end of a shoulder. The "run-out" section is often slightly larger than the pitch diameter, which prevents a nut or a flat surface from sitting flush.
Flush Mounting: Allows the head or shoulder of the fastener to seat fully against the workpiece.
Stress Reduction: Provides a smooth transition to reduce stress concentrations at the neck.
Manufacturing Ease: Simplifies the tool exit path during the threading process. 📐 Geometric Dimensions (Summary Table)
The dimensions of the undercut depend primarily on the thread pitch (
). Below is a summary of the standard values defined in ISO 4755. (Dia. max) (Width min) (Width max) (Radius min) 0.5 0.75 1.0 1.25 1.5 2.0 2.5 : Nominal thread diameter. : Maximum diameter of the undercut. : Range of the undercut width. : Minimum fillet radius to avoid sharp corners. 🏗️ Design Rules According to SIST ISO 4755:
Transition Angle: The angle between the undercut and the threaded portion should typically be at least 30°.
Surface Finish: The undercut surface should ideally be smoother than the thread itself to prevent crack initiation.
Applicability: This standard is recommended for bolts, screws, and plugs unless a specific product standard (like DIN 7965) mandates a different geometry. 🔍 Related Standards
UNI 5709: Older Italian national standard for thread undercuts, now largely superseded by ISO 4755.
DIN 76-1: The German equivalent often used in European engineering drawings for thread run-outs and undercuts.
ISO 3506: Useful if you are working with stainless steel fasteners and need to check mechanical property requirements alongside geometry.
If you are modeling this in CAD, would you like a step-by-step guide on how to create this feature in SolidWorks or AutoCAD?
Connecting rod bolts and cylinder head bolts almost always conform to an undercut standard (often derived from ISO 4755). When rebuilding an engine, mechanics look for this groove to confirm they are using OEM-grade fasteners, not cheap hardware store substitutes.
The "Tabella Gola UNI ISO 4755" is not just a dusty reference in an old manual. It is a live engineering tool that guarantees:
Whether you are designing a motor mount, repairing a lathe, or ordering 10,000 M10x1.5 bolts for an assembly line, keep this table laminated on your workshop wall or saved in your engineering PDF library.
Final Checklist for Engineers:
a dimension to prove clearance).By mastering the UNI ISO 4755 undercut dimensions, you move beyond basic fastener selection into precision mechanical engineering.
Disclaimer: Dimensional values in this article are based on the publicly available UNI ISO 4755:1992 standard. For legal certification or aerospace applications, always consult the original standard document. The story of UNI ISO 4755 (often referred
UNI ISO 4755 (corrispondente alla norma internazionale ISO 4755:1983 ) specifica la forma e le dimensioni delle gole di scarico
per viti, bulloni e prodotti simili con filettatura metrica ISO. iTeh Standards
Queste gole sono necessarie per permettere l'accoppiamento a battuta di componenti filettati (come i tappi) o per fornire spazio all'utensile durante la lavorazione al tornio. iTeh Standards Caratteristiche Geometriche Principali
Secondo la norma, la gola di scarico standard deve presentare: Angolo di transizione 30 raised to the composed with power Diametro della gola ( : Calcolato in base al diametro nominale ( ) e al passo ( ) della filettatura. Larghezza della gola ( : Definita in funzione del passo Raggio di raccordo (
: Dimensionato per evitare intagli e concentrazioni di sforzi. Fasteners Engineering Tabella Dimensionale UNI ISO 4755 (Estratto) Le dimensioni variano in base al passo della filettatura ( ). Tutti i valori sono espressi in millimetri (mm). Diametro Gola ( Dati estratti dai manuali tecnici forniti da Fasteners.it e dalla documentazione ufficiale Note Applicative Tolleranze : Il diametro della gola segue solitamente la tolleranza per diametri superiori a 3 mm). Alternative : In Italia, la vecchia norma
è stata ritirata nel 2009 e sostituita dalla UNI ISO 4755, sebbene rimanga un riferimento storico per vecchi progetti.
: Si raccomanda l'uso della gola ISO 4755 solo quando strettamente necessario; in caso contrario, si preferisce la filettatura incompleta (spallamento) per non indebolire la sezione resistente del bullone. iTeh Standards Hai bisogno delle quote specifiche per un diametro nominale (M) particolare o preferisci approfondire la quotatura a disegno ISO-4755-1983.pdf - iTeh Standards
La norma UNI ISO 4755 (corrispondente alla norma internazionale ISO 4755:1983) definisce la forma e le dimensioni delle gole di scarico per viti, bulloni e altri elementi con filettatura esterna metrica ISO.
L'impiego di una gola di scarico è fondamentale per permettere il corretto accoppiamento tra un elemento filettato e una superficie di appoggio (spallamento), eliminando l'interferenza causata dal tratto di filetto incompleto tipico dei processi di lavorazione meccanica. Tabella Dimensionale UNI ISO 4755
Le dimensioni della gola sono strettamente legate al passo della filettatura (P). Di seguito i valori standard espressi in millimetri per le filettature metriche più comuni: Passo filettatura (P) Diametro gola ( Larghezza gola ( Larghezza gola ( 0,5 0,7 0,8 1,0 1,25 1,5 1,75 2,0 2,5 3,0 : Diametro nominale della filettatura. : Diametro del fondo della gola.
: Distanza minima tra l'ultimo filetto completo e la faccia di appoggio. : Lunghezza massima complessiva della gola (circa Caratteristiche Geometriche e Scopo
La conformità alla norma ISO 4755 garantisce l'intercambiabilità dei componenti a livello internazionale e migliora l'affidabilità meccanica.
Forma della Gola: Presenta un profilo studiato per ridurre la concentrazione di tensioni (stress concentration) alla base del filetto, diminuendo il rischio di rotture per fatica sotto carichi dinamici.
Angolo di Transizione: La norma prevede generalmente un angolo di transizione minimo di 30° per facilitare il passaggio tra il diametro della gola e la parte filettata.
Campo di Applicazione: Si applica a tutti i prodotti filettati esternamente dove sia necessaria una gola (es. tappi, viti corte), a meno che la specifica norma di prodotto non indichi diversamente.
Relazione con UNI 5709: La UNI ISO 4755 ha parzialmente sostituito la vecchia norma italiana UNI 5709, che rimane tuttavia in vigore per la definizione delle distanze di spallamento e dei filetti incompleti (run-out). Vantaggi del Progetto Standardizzato
Montaggio Facilitato: Assicura che l'elemento filettato arrivi a battuta perfetta contro la superficie di appoggio.
Produzione Ottimizzata: Fornisce quote precise per gli utensili da taglio e le operazioni di rullatura, riducendo gli errori di programmazione CNC.
Riduzione dei Costi: La standardizzazione mitiga i rischi di componenti non accoppiabili, fondamentale nel commercio globale. ISO-4755-1983.pdf - iTeh Standards
The UNI ISO 4755 standard (equivalent to ISO 4755:1983) specifies the required form and dimensions for thread undercuts (Italian: gole di scarico) on externally threaded fasteners like bolts and screws. These undercuts are used to provide clearance for a mating part (such as a plug or sealing element) to sit flush against a shoulder when the thread cannot be run all the way to the end. Key Specifications of ISO 4755
The standard provides a tabulated set of dimensions in millimeters, which are determined by the thread pitch ( ) and the nominal diameter ( ) of the fastener. Undercut Diameter (
): The diameter of the recessed portion, typically smaller than the thread's minor diameter to ensure clearance. Undercut Width (
): The axial length of the relief section. Standard relief is often between one and three full thread pitches.
Transition Angle: The standard specifies the shape and transition between the threaded portion and the undercut, generally requiring a minimum transition angle of 30∘30 raised to the composed with power where applicable. Radii (
): Specifies the corner radii to minimize stress concentrations in the fastener. Typical Dimensioning Table (Summary)
The official ISO 4755 table provides specific values for each pitch. Below is a general guide on how dimensions are typically derived: Reference Formula/Requirement Diameter ( )
Linked to thread minor diameter to ensure mating part clearance. Width ( ) (Standard) or Radius ( )
Sized to avoid sharp edges while maintaining structural integrity.
For detailed engineering drawings or manufacturing, you can find complete technical PDFs and tables through specialized fastener resources like Fasteners.eu or official ISO portal snippets. g., M10 or M12)?
UNI ISO 4755 standard specifies the dimensions for thread undercuts gola di scarico
) for fasteners with external metric ISO threads. This "feature" is
a machined groove located at the end of the threaded portion of a bolt or screw, where it meets a shoulder or collar ISO - International Organization for Standardization Key Features of the ISO 4755 Undercut
: It provides clearance for the assembly of mating parts (like a nut or a flange) to sit flush against the fastener's shoulder, as threads cannot be cut perfectly to the very edge of a solid wall. : The undercut dimensions are determined by the thread pitch ( Diameter ( : Typically at least smaller than the thread's minor diameter. : Generally recommended to be between for normal applications. Transition : It often includes a radius or chamfer (e.g., 45 raised to the composed with power Definizioni e terminologia relativa alla gola Metodi di
) to reduce stress concentration at the transition between the thread and the shoulder. Common Applications This feature is standard in mechanical engineering for: Precision fasteners where a tight, flush fit against a surface is required. Automated assembly
, ensuring no interference from incomplete "run-out" threads. for common thread sizes like M6 or M10?
This guide clarifies the specifications and use of the UNI ISO 4755 standard regarding the "tabella gola" (groove/chamfer dimensions) for fasteners.
The complete UNI ISO 4755:2005 (including the full tabella gola with all diameters from M1 to M100+) is available for purchase from:
⚠️ This report is for informational purposes only. For manufacturing, always refer to the official standard document.
If you need the exact numeric table for a specific thread size (e.g., M6, M10, M16), let me know and I can extract the corresponding gola dimensions according to UNI ISO 4755.
UNI ISO 4755 standard is a fundamental reference in industrial design for the geometric definition of thread undercuts (known in Italian as gole di scarico
) for fasteners with external metric ISO threads. These undercuts are critical features used to ensure a "complete" thread runs all the way to a shoulder, allowing mating parts like plugs or screws to sit perfectly flush against a surface. iTeh Standards Functional Importance of Under-cuts
In mechanical turning, it is impossible for a cutting tool to create a perfect thread right up to a vertical shoulder without a relief zone. The undercut provides: Tool Clearance:
Space for the threading tool to "run out" or disengage safely at the end of the pass. Flush Assembly:
Prevents interference from incomplete thread crests, ensuring the screw head or plug shoulder makes full contact with the mating surface. Stress Management:
Properly dimensioned undercuts, typically featuring a 30° transition angle, help manage mechanical stress at the transition point. WordPress.com Technical Dimensions (UNI ISO 4755) The standard provides specific dimensions based on the thread pitch ( . Key parameters include the undercut diameter ( ), the width ( ), and the transition radius ( iTeh Standards Thread Pitch ( Undercut Diameter ( is approximately equal to 3 cap P Data source: ISO 4755:1983 Dimensional Table Design Considerations Transition Angle:
The standard specifies a minimum angle of 30° for the transition between the undercut and the thread. Relationship with Other Norms: While UNI ISO 4755 covers undercuts for external threads,
is often cited for incomplete thread run-outs, and they are frequently used together in technical manuals. Application:
These dimensions are recommended for general-purpose fasteners unless a specific product standard (e.g., for specialized bolts) mandates different proportions. Fasteners Engineering GOLE DI SCARICO
The Essential Guide to UNI ISO 4755: Mastering Thread Undercuts
In precision engineering, the smallest details often determine the success of a mechanical assembly. One such detail is the thread undercut (or gola di scarico), governed by the UNI ISO 4755 standard.
Whether you’re a machinist or a mechanical designer, understanding this "tabella gola" is critical for ensuring that bolts, screws, and plugs sit flush against their mating surfaces without interference. What is UNI ISO 4755?
The UNI ISO 4755 standard specifies the form and dimensions for thread undercuts on fasteners with external metric ISO threads. It provides a standardized "relief groove" at the end of a threaded section, allowing a cutting tool to exit cleanly and ensuring a flat seat for the mating component. Why are Undercuts Necessary?
Tool Clearance: They provide space for the thread-cutting tool to finish its pass without crashing into a shoulder.
Flush Fitting: Without an undercut, a small radius or incomplete thread often remains at the base of a shaft, preventing a nut or part from seating perfectly flat.
Stress Management: Properly designed undercuts can reduce stress concentrations at the transition point of a fastener. Key Dimensions in the UNI ISO 4755 Table
The standard provides specific dimensions (in mm) tied to the thread pitch (
). Key parameters found in technical tables like Fasteners.it include:
(Undercut Diameter): The reduced diameter of the groove, often calculated based on the nominal diameter ( ) minus a specific value (e.g., for certain pitches).
(Undercut Width): The axial length of the groove. A common rule of thumb is that the undercut should be roughly times the thread pitch (
Transition Angle: The standard typically recommends a minimum transition angle of 30∘30 raised to the composed with power Sample Dimension Data Thread Pitch ( Undercut Diameter ( Data extracted from standard UNI ISO 4755 tables. Best Practices for Designers
Check Your Pitch: Dimensions for undercuts are strictly dependent on the thread pitch, not just the diameter.
Consult the Product Standard: UNI ISO 4755 is the general recommendation, but specific product standards (like those for specialized plugs) may take precedence.
Manufacturing Method: Be aware that rolled threads may have different requirements compared to machined (cut) threads, as noted in related standards like UNI 5709. ISO-4755-1983.pdf - iTeh Standards
Without a standardized undercut:
The gola (undercut) provides a clearance groove with a controlled diameter and width, ensuring: