Guides
GuidesAPI ReferenceNotificationsDiscussionsSupportStatus
Start typing to search…

Tp.vst59s.pb813 Firmware Mirror 【100% VALIDATED】

TP.VST59S.PB813 is a popular "three-in-one" universal LED TV motherboard used across various brands like Haier, Akai, and Telefunken. When the display appears upside down or the colors are distorted after a repair, you likely need to apply a Mirror Firmware update or adjust the "Mirror" setting in the service menu. Quick Fix: The Service Menu "Mirror" Setting

Before downloading new firmware, try the built-in software toggle: on your remote. Enter the code to open the Factory/Service Menu. Panel Settings General Settings option and toggle it (On/Off). Exit and restart the TV to save changes. Firmware Mirror Download & Installation

If the service menu doesn't work, you must flash a firmware version specifically configured for your panel's orientation. Mirror Firmware Links Haier specific (10data) : Available on Kotit-Tech General Archive

: Large collections of .BIN files for various resolutions can often be found in technician groups on platforms like Key Specifications to Match Resolution : Ensure you choose the right file for your screen, either (Full HD). Backlight Voltage : The board typically supports قطيط تك Step-by-Step USB Update Guide Prepare the Drive : Use a USB drive formatted to Copy the File : Place the firmware file (often named bin_v59.bin or similar) in the root directory (not inside a folder). : Unplug the TV from the power outlet. Insert USB : Plug the drive into the TV's USB port. Start the Flash

: Plug the TV back in. The standby LED should start blinking (red/blue), indicating the update is in progress.

: Once the blinking stops, remove the USB drive and turn on the TV. Safety Warnings

TP.VST59S.PB813 Firmware Mirror: Reliable Download & Installation Guide

Is your LED TV stuck on a black screen, displaying only the logo, or not turning on at all? If you are running the popular TP.VST59S.PB813

universal driver board, a firmware corruption might be the issue.

In this post, we’ve provided a secure mirror for the TP.VST59S.PB813 firmware, along with a quick guide to get your screen back to life. What is TP.VST59S.PB813? TP.VST59S.PB813

is a versatile universal LCD/LED TV controller board used extensively by technicians to repair or convert LCD panels into functional TVs. It supports various screen resolutions and comes with HDMI, USB, VGA, and AV ports. Why You Need This Firmware Stuck on Logo: TV powers on but won't pass the initial screen. Standby light is on, but the TV won't start. Incorrect Resolution: Image is distorted or showing incorrect colors. Remote Control Issues: Firmware update can resolve IR receiver malfunctions. 🔥 TP.VST59S.PB813 Firmware Mirror Tp.vst59s.pb813 Firmware Mirror

Download the firmware file below. This is a common, stable version for this board. Download TP.VST59S.PB813 Firmware (.bin file) (Google Drive Mirror)

Note: Ensure your TV panel resolution matches the firmware, or you may get a distorted image. 🛠️ How to Install/Flash Firmware (USB Method) Follow these steps carefully to flash your board via USB: Format USB Drive: Format a USB flash drive to Copy Firmware: Download the firmware file (

) and copy it directly to the root directory of the USB drive. Do not put it inside a folder. Power Off: Unplug the TV from the wall socket. Connect USB: Plug the USB drive into the TV's USB port.

Plug the TV back in. The standby light should start flashing (this means it is writing to the memory). Keep the TV powered for 1–2 minutes. Do not turn off the power during this process.

When the light stops flashing and the TV turns on, the update is complete. Remove USB:

Remove the drive and delete the firmware file to prevent the TV from re-flashing itself upon reboot. 🚨 Disclaimer

Flashing firmware can be risky. Ensure you have a stable power supply during the process. We are not responsible for any damage caused to your equipment.

Keywords: TP.VST59S.PB813 Firmware, Universal Board Firmware, TV Repair, LED TV Firmware Download, PB813 Software.

To resolve a "mirror image" (upside-down or reversed) display issue on the TP.VST59S.PB813

universal LED TV motherboard, you can either adjust settings via the hidden service menu or reflash the firmware. Method 1: Service Menu Adjustment (Recommended) Desolder or clip onto the 25-series SPI flash chip

This is the easiest way to fix a flipped screen without needing external tools. Open the Service Menu : Using the TV remote, press and then quickly enter the code Locate Panel Settings : Navigate through the menu to find Panel Settings Project Settings Toggle Mirror Control : Find the Mirror Control option. Change its value (e.g., from or vice versa). Save and Exit : Turn the TV off and back on to apply the changes. Method 2: Firmware Reflash (Mirror Mirror Fix)

If the service menu does not have a mirror option, you must install firmware specifically matched to your panel's resolution and orientation. Preparation Identify your panel's resolution (e.g., Download the correct firmware for the TP.VST59S.PB813

board. Search for mirror-corrected files on technician forums or platforms like the Service Menu Code Guide Installation Steps Copy the firmware file (usually named ) to the root of a FAT32-formatted USB drive.

Insert the USB drive into the TV's USB port while the power is off.

Power on the TV. The standby light should start flashing, indicating the update is in progress.

Once the flashing stops, remove the USB drive and restart the TV. Sparefocus Method 3: Hardware Modification (Alternative)

If software methods fail, some T-Con boards allow you to flip the image by grounding a specific pin (often labeled "Mirror" or "SEL"). This typically involves: Identifying the VCC/Ground points on the T-Con board.

Moving a small resistor or jumping a pin to change the logic state of the mirror pin.

: Incorrect service menu changes or firmware can brick your motherboard. Always verify your panel voltage (typically 5V or 12V) before connecting a new board. Are you currently seeing an upside-down image or a scrambled/color-distorted (LVDS mapping) display?

The TP.VST59S.PB813 is a widely used Chinese universal motherboard (chassis) found in various LED and LCD television brands, including Mystery, Haier, Telefunken, and Shivaki. Firmware for this board is typically distributed as "bin" or "dump" files specific to the panel resolution (e.g., Core Hardware Specifications Processor (CPU): TSUMV59XUS. Flash Memory: SPI Flash GD25Q32B or W25Q32 (32 Mbit / 4MB). Tuner: Rafael Micro R840. Audio: TPA3110 amplifier. Panel Support: Compatible with both "low-score" ( ) and "high-score" ( ) screens. Service Menu and Access Codes Now you have a virgin backup

To adjust internal parameters like display orientation (mirroring), backlight levels, or color balance, use the following service codes: All LED TV Service Menu Codes | PDF - Scribd

Using a CH341A Programmer

  1. Desolder or clip onto the 25-series SPI flash chip.
  2. Use AsProgrammer or NeoProgrammer software.
  3. Read the chip and save as .bin.
  4. Verify by reading twice – both dumps must match.

Now you have a virgin backup. Store it on multiple cloud mirrors (Google Drive, Mega, Dropbox). You can then safely test other firmware, knowing you can always revert.

Why Do You Need a Firmware Mirror?

The original TP.VST59S.PB813 firmware is notoriously difficult to find on official sites. Most manufacturers do not host public archives. Consequently, technicians rely on third-party forums, Google Drive links, and Russian file-sharing sites. This is dangerous.

A "firmware mirror" refers to an alternative, verified download location for the same binary file. Here is why you need a mirror:

  1. Dead Links are Common: The original forum post from 2016 might have a dead Mega.nz link. A mirror ensures availability.
  2. Malware Risks: EXE files disguised as firmware are rampant. A trusted mirror (e.g., Internet Archive or known tech blogs) scans files.
  3. Version Matching: There are at least six hardware variants (PB813, PB813-1, PB813-C, etc.). A mirror usually provides checksums (MD5/SHA1) to verify integrity.
  4. Brick Recovery: If you flash the wrong firmware, the board becomes unresponsive. The only way to recover is via a known-good mirror and a USB flashing procedure.

2. Where to Find Firmware Mirrors (Community Sources)

No official manufacturer website exists. Use these trusted sources (always scan files for malware):

| Source | Notes | |--------|-------| | ElektroTanya (elektrotanya.com) | Search TP.VST59S.PB813. Best for service manuals and original .bin dumps. | | Badcaps.net forums | Active TV repair community. Search board ID + “firmware” or “dump”. | | AliExpress seller links | If you bought the board there, message the seller — many provide Google Drive/Mediafire links. | | YouTube video descriptions | Search “TP.VST59S.PB813 firmware flash” — uploaders often share mirrors. | | Archive.org | Rare, but some users archive TV firmware collections. |

Scenario 4: Wrong Button Functions

The OSD menu appears, but the volume changes inputs, or power buttons do nothing. The keypad mapping in the firmware is wrong.

In all these cases, a verified firmware mirror is the only safe fix.

Step 4: The “Mirror” Meaning

When a technician says “firmware mirror”, they mean a byte-for-byte copy of the original SPI flash. These are typically .bin or .hex files, usually 512KB or 1MB in size. If you download a 2MB file for a V59 board, it is probably wrong.

3. ElektroTanya (Elektrotanya.com)

This is a premium schematic and firmware repository. Search VST59S PB813. Their mirrors are slow but safe. You will find factory firmware dumps with panel-specific configurations.