If you are looking to install a custom recovery on your Samsung Galaxy Tab E 9.6, you likely need the twrp3021smt560tar file. This specific version of Team Win Recovery Project (TWRP) is the gateway to rooting your device, flashing custom ROMs, and creating full system backups.
Below is a comprehensive guide on what this file is, where to get it, and how to safely flash it to your tablet. What is twrp3021smt560tar?
The filename breaks down into three important parts that you must verify before flashing:
TWRP 3.0.2-1: This refers to the version of the recovery. While older, it is often the most stable "full" version for legacy Tab E hardware.
SM-T560: This is the specific model number for the Samsung Galaxy Tab E 9.6 (Wi-Fi variant).
.tar: This extension indicates the file is packaged for Samsung’s proprietary flashing tool, Odin. Prerequisites Before You Begin
Flashing a custom recovery carries risks, including "bricking" your device or voiding your warranty. Ensure you have the following ready:
Correct Model: Confirm your tablet is the SM-T560. Do not flash this on the T561 (3G version) unless the developer explicitly states compatibility.
Battery Charge: Ensure your tablet has at least 50% battery. Drivers: Install the latest Samsung USB Drivers on your PC.
Odin: Download Odin3 (version 3.10.7 or newer is recommended).
Settings: Go to Settings > About Device. Tap "Build Number" seven times to unlock Developer Options. Inside Developer Options, enable USB Debugging and OEM Unlock. Step-by-Step Installation Guide
Download the File: Search for the "twrp3021smt560tar" file from a reputable source like XDA-Developers or the official TWRP website.
Boot into Download Mode: Power off your tablet. Press and hold Volume Down + Home + Power buttons simultaneously. When the warning screen appears, press Volume Up to continue.
Connect to PC: Open Odin on your computer and connect your tablet via a high-quality USB cable. The "ID:COM" box in Odin should turn blue or yellow.
Load the Recovery: Click the AP (or PDA) button in Odin. Select the twrp3021smt560tar file you downloaded.
Check Options: Ensure only "Auto Reboot" and "F. Reset Time" are checked. Do not check "Re-Partition." twrp3021smt560tar full
Flash: Click Start. Once the process is finished, Odin will show a green "PASS!" message. ⚠️ Critical Note on First Boot
Samsung devices often try to overwrite custom recoveries with the stock one during the first reboot. To prevent this:
As soon as the tablet reboots after the flash, immediately hold Volume Up + Home + Power. This forces the device into TWRP instead of the Android OS.
Once in TWRP, it may ask if you want to "Allow Modifications." Swipe to allow. Why Use TWRP 3.0.2-1?
Nandroid Backups: Create a "snapshot" of your entire system. If you mess up a setting, you can restore everything in minutes.
Root Access: You can flash Magisk or SuperSU zip files to gain administrative rights.
Custom ROMs: Move from the aging TouchWiz interface to cleaner versions of Android (like LineageOS).
Partition Management: Easily wipe cache or Dalvik cache to fix performance issues.
If you run into a boot loop or Odin shows a "Fail" message, let me know: What version of Windows are you using? Is your tablet the Exynos or Spreadtrum version? Did you see a specific error code in Odin?
The TWRP 3.0.2-1 .tar file for the Samsung Galaxy Tab E 9.6 (SM-T560)
is a custom recovery image used primarily for rooting or installing custom ROMs on this specific tablet. This version is typically flashed using the Odin software on a Windows PC while the tablet is in "Download Mode". Key Download & Installation Details Official Device Support: The
is often categorized under the codename gtel3g (for 3G/Wi-Fi models) or gtelwifiue (for North American variants like the SM-T560NU).
File Format: You need the .tar version to flash via Odin. The .img version is only for updating from within an existing TWRP recovery. Source Links:
Find official builds and legacy versions on the TWRP for Samsung Galaxy Tab E page.
Alternative mirrors for older versions or specific variants can be found at SourceForge - RetiredTab. Installation Steps via Odin If you are looking to install a custom
Preparation: Enable USB Debugging and OEM Unlocking (if available) in your tablet's Developer Options.
Download Mode: Power off the tablet, then hold Home + Volume Down + Power simultaneously until a warning screen appears, then press Volume Up to enter Download Mode. Flash Recovery: Open Odin on your PC and connect the tablet.
Click the AP (or PDA) button and select the twrp-3.0.2-1-sm-t560.tar file. Click Start.
First Boot: Once Odin shows "PASS," the tablet will reboot. To enter TWRP immediately, hold Home + Volume Up + Power.
Warning: Installing custom recovery can trip Knox, void your warranty, and potentially lead to data loss. Always back up your data before proceeding. If you'd like, I can help you find: The Odin software download link. Compatible Custom ROMs for the (like LineageOS).
A guide for rooting with SuperSU or Magisk once TWRP is installed. AI responses may include mistakes. Learn more TWRP for Samsung Galaxy Tab E (SM-T560NU)
The file twrp-3.0.2-1-sm-t560.tar is a custom recovery image for the Samsung Galaxy Tab E 9.6 (SM-T560). It is packaged in a .tar format specifically for flashing via the Odin tool on Windows. File & Device Details Device: Samsung Galaxy Tab E 9.6 (Wi-Fi version).
Model Number: SM-T560 (Codename: gtelwifi or gtel3g depending on specific regional hardware). TWRP Version: 3.0.2-1. Format: .tar (Odin-flashable). Installation Overview
To install this recovery, you typically use a Windows PC with Odin: Download Requirements: The twrp-3.0.2-1-sm-t560.tar file.
Odin3 (v3.12.3 or later recommended) from sources like OdinDownloader. Samsung USB Drivers available at Samsung Developers.
Preparation: Enable USB Debugging and OEM Unlock (if available) in the tablet's Developer Options.
Download Mode: Power off the tablet, then hold Home + Volume Down + Power until a warning screen appears; press Volume Up to enter Download Mode. Flashing: Connect the tablet to your PC.
In Odin, click the AP (or PDA) button and select the .tar file. Click Start. Once it finishes, the device will reboot. Recovery Verification
After flashing, boot into recovery by holding Home + Volume Up + Power. If successful, the TWRP interface will appear, allowing you to flash custom ROMs or root the device using SuperSU or Magisk.
Important Safety Note: Ensure you are using the exact file for the SM-T560. Using files for similar models like the SM-T560NU (North American version) can cause boot loops or brick your device as they use different processors. XDA Forums – “SM-T560 TWRP” Telegram groups for
It seems you're asking for a review or information about a TWRP recovery image for a device with the identifier twrp3021smt560tar. Let me break down what this appears to be and provide relevant notes.
Search on:
Final verdict for 2026:
Outdated but functional for legacy use. Strongly recommended to find a newer TWRP build if available.
If you need help locating a modern TWRP for SM-T560, let me know and I can guide you.
It looks like you’re asking for a generated piece related to the file:
twrp3021smt560tar
Based on the naming pattern, this appears to be a TWRP (Team Win Recovery Project) image file intended for a specific Samsung device — likely the Galaxy S5 Mini (SM-G800H) or a similar model from that era (the “smt560” portion suggests a device codename like smt560 or SM-T560 — possibly a Galaxy Tab).
Here’s a generated technical / documentation-style piece:
A standard recovery flash might only write to the recovery partition. However, Samsung’s bootloader checks recovery integrity. A "full" TAR includes the recovery.img plus the param.bin and cache.img fixes. It ensures:
twrp3021smt560tar full?Before you download any file, you must understand its anatomy. The filename is not random; it describes the exact software package.
In essence, twrp3021smt560tar full is the complete, all-in-one Odin-flashable package for the Galaxy Tab E Wi-Fi.
Cause: Android 6.0+ introduced forced encryption. TWRP 3021 can see the encryption but cannot decrypt it without a pattern/password. Fix:
Wipe > Format Data.Device Identification: Ensure that "3021SMT560" closely matches your device's model. Samsung devices' model numbers can be found in Settings > About Phone.
Download TWRP: If your device is supported by TWRP, you can usually find it on the official TWRP website. Search for your device there.
Odin for Flashing: To flash TWRP on a Samsung device, you typically use Odin, a software developed by Samsung. Ensure you download the correct TWRP file (usually a .tar.md5 or just .tar file) and follow a reliable guide to flash it.
Cause: The SM-T560 has multiple display panel variants (TFT vs. Super AMOLED). Fix: Do not use the touch screen. Connect a USB-OTG mouse to navigate TWRP. Alternatively, compile a kernel specific to your panel, but version 3.0.2-1 usually supports both.