Usb Device Id Vid 1e3d Pid 198a Top Access

The USB hardware ID VID 1e3d PID 198a identifies a generic Flash Disk manufactured by Chipsbank Microelectronics Co., Ltd

. These IDs are often associated with low-cost or "no-name" USB drives, as well as some counterfeit storage devices sold on marketplaces like AliExpress. Technical Device Breakdown Vendor (VID): — Chipsbank Microelectronics Co., Ltd. Product (PID): — Flash Disk / ChipsBnk Flash Reader. Common Controllers: Frequently uses the Chipsbank CBM2099E controller chips. USB 2.0 (High Speed). Common Issues and Identification

This specific ID is notorious in tech support forums for appearing on drives that have "failed" or were manufactured with "fake" capacities. "No Media" Error:

Users often report that the computer recognizes the device (the "ChipsBnk" controller) but shows "No Media" or a capacity of

. This typically indicates a communication failure between the controller chip and the flash memory chip. Fake Capacity Warnings:

Some "16TB" or "2TB" SSDs/thumb drives from discount sites use this Chipsbank ID to trick the OS into reporting a high capacity, while the actual physical storage is much lower (e.g., 32GB or 64GB). Device Recognition: In Linux, it usually appears in ID 1e3d:198a Chipsbank Microelectronics Co., Ltd Flash Disk Troubleshooting and Recovery Steps

If your device is showing this ID but isn't working correctly, you can try the following: Identify Real Specs: Use tools like ChipGenius Flash Drive Information Extractor (usbflashinfo) to get the exact controller part number and Flash ID. Controller-Specific Tools:

If the drive is non-functional but detected, you may need a "Mass Production Tool" (MPTool) specific to the Chipsbank CBM2099/2199 series to re-initialize the controller. Check for Counterfeits: (Windows) or

(Linux/Mac) to test the actual storage capacity. If the test fails early, the drive's advertised capacity is likely fake. Hardware Test Mode:

For advanced users, some forum guides suggest putting the chip into "test mode" by shorting specific pins on the controller to force the computer to recognize it as a generic bootable device for firmware reflashing.

Using mass production tools or shorting pins often results in complete data loss. If you need the data, consult a professional recovery service before attempting firmware fixes. Are you trying to recover data from a drive with this ID, or are you looking for the firmware/drivers to fix a "No Media" error? USB\VID_1E3D = Chipsbank Microelectronics Co., Ltd

Identifying a device using its VID (Vendor ID) and PID (Product ID) is the most reliable way to troubleshoot hardware issues, find specific drivers, or determine the true manufacturer of a generic "no-name" USB drive.

The identifiers VID 1E3D and PID 198A point directly to a flash drive manufactured by Chipsbank Microelectronics Co., Ltd.. These chips are commonly found in budget USB mass storage devices and "generic" promotional flash drives. Device Overview: Chipsbank Microelectronics (1E3D:198A)

Devices with these identifiers are typically USB 2.0 High-Speed flash disks.

Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.) Product ID (PID): 198A (Flash Disk / UDisk) Common Controller Models: CBM2198A, CBM2199E, or CBM209x

Typical Capacity: Varies widely, but often found in 16GB, 32GB, and up to 128GB configurations. Common Issues and Troubleshooting usb device id vid 1e3d pid 198a top

Because Chipsbank controllers are often used in budget drives, users frequently report issues such as the drive showing "No Media," being "Write Protected," or failing to format. NirSofthttps://usbspeed.nirsoft.net VID = 1e3d, PID = 198a - USB Flash Drive Speed Tests

I’m unable to find a specific “top — deep” article for the USB device with VID 1E3D and PID 198A.

However, here is the known information about this device:

These devices are commonly found in fake capacity USB drives (e.g., drives reporting 64GB/128GB but actually having 4GB/8GB). Tools like ChipGenius, usbflashinfo, or CBM209X MPTool are used to detect and repair them.

If you saw “top — deep” in a log or tool output, it might be:

To get a deep technical article on this VID/PID, search for:

Would you like help identifying a specific tool to test or repair a drive with this VID/PID?

The USB device ID VID 1E3D PID 198A identifies a Flash Disk or USB Mass Storage Device. Device Identification

Vendor: Chipsbank Microelectronics Co., Ltd. (Vendor ID: 0x1E3D).

Product: Flash Reader or Generic Flash Disk (Product ID: 0x198A).

Internal Hardware: This device often uses the ChipsBank CBM2199S controller. Technical Details

According to reports from DeviceHunt and user logs on Reddit, the device typically has the following specifications: Protocol: USB 2.0 (High Speed). Power Consumption: Maximum current of 100mA. Revision: Device Revision 0100; Product Revision 5.00. Troubleshooting and Tools

If you need to verify this ID or find drivers, you can use these operating system tools:

Windows: Open Device Manager, right-click your device, select Properties, and go to the Details tab to view "Hardware IDs".

Linux: Run the lsusb command in the terminal to list all connected USB devices and their IDs. The USB hardware ID VID 1e3d PID 198a

Third-Party Utilities: Tools like USBDeview from NirSoft can provide extended information, including the last time the device was connected and its serial number.

How do I check the PID and VID of my USB device? - Synology KB

Understanding USB Device ID: VID 1E3D PID 198A The USB device identifiers VID 1E3D and PID 198A are specific codes that identify a hardware product produced by Chipsbank Microelectronics Co., Ltd.. In technical terms, the VID (Vendor ID) 1E3D points to Chipsbank, while the PID (Product ID) 198A typically represents a "Flash Disk" or a generic USB mass storage controller. Technical Specifications and Device Role

This combination is most commonly associated with budget-friendly USB flash drives and memory card readers. Because Chipsbank provides controllers to many third-party manufacturers, you might find this ID on devices branded as Lenovo, General UDisk, or even unbranded promotional "giveaway" sticks.

Controller Models: Often utilizes the CBM2098, CBM2099, or CBM2198A series of controllers. Protocol: Generally supports USB 2.0 High Speed.

Performance: Speed tests typically show read speeds between 10–45 MB/s and write speeds between 3–17 MB/s, depending on the specific NAND flash paired with the controller. Common Issues and Recovery

Devices with this ID frequently encounter "write protection" errors or appear as "unrecognized" in Windows because of firmware corruption or "fake capacity" issues (where a drive reports more storage than it physically has).

If your device is malfunctioning, you may need specialized mass production tools (MPTools) to re-flash the controller. Common utilities for this VID/PID include: Chipsbank Microelectronics Co. Ltd - USBDev.ru

The USB device identified by VID 1E3D and PID 198A is a mass storage device utilizing a controller from Chipsbank Microelectronics Co., Ltd.. This specific hardware ID is commonly associated with budget or "no-name" USB flash drives, often sold as promotional items or through online marketplaces like AliExpress. Technical Specifications Manufacturer: Chipsbank Microelectronics Co., Ltd.

Controller Models: Frequently uses CBM2199 series chips (including CBM2199S, CBM2199E, or CBM2199A). Protocol: USB 2.0 (High Speed).

Performance: Performance varies significantly by the flash memory paired with the controller:

Read Speeds: Typically range from 10 MB/s to 45 MB/s depending on drive capacity. Max Current: 100mA. Performance & Reliability Review Chipsbank Microelectronics Co. Ltd - USBDev.ru

USB Device ID VID 1E3D PID 198A identifies a mass storage device manufactured by Chipsbank Microelectronics Co., Ltd

. These identifiers are most commonly associated with low-cost or "no-name" USB flash drives, often using the Chipsbank CBM2199 series controller. DeviceHunt Technical Breakdown Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.). Product ID (PID): 198A (Flash Disk / Mass Storage Device). Common Controller: CBM2199E or CBM2199S. Device Type: USB 2.0 High Speed Mass Storage. DeviceHunt Why You Might See This ID This specific ID frequently appears in two scenarios: Generic "No-Name" Drives:

Many unbranded metallic or plastic "key" drives sold in bulk or as promotional items use this Chipsbank hardware. Fake Capacity Devices: VID 1E3D is registered to Chipsbank Microelectronics Co

This ID is often found in "fake" storage devices (e.g., drives labeled as 2TB or 16TB that are actually 8GB or 32GB). The Chipsbank controller is modified to report a false capacity to the operating system. Super User Troubleshooting & Recovery

If your device shows "No Media," "Write Protected," or "Please Insert Disk," it often indicates a firmware corruption or a failed flash chip.

Here’s a clean, professional write-up for the USB device with VID 1E3D and PID 198A, incorporating “TOP” as a likely product or brand identifier.

The Product: A Versatile Bridge Chip (198a)

The PID 198a maps to a highly flexible USB 2.0 to multi-interface bridge controller. Unlike a standard FTDI chip (which only does serial), the 198a is a composite device. This means it can present itself to your PC as several different things at once:

  1. A CDC Serial Port (Virtual COM port for debugging).
  2. A JTAG/SWD interface (For programming microcontrollers).
  3. A SPI/I2C bridge (For flashing EEPROMs or sensors).

Common Hardware containing VID 1E3D PID 198A:

You will most likely find this chip inside one of the following devices:

How to Fix It: Driver Installation Guide

Do not use "Driver Updater" software from pop-up ads. They will break your system. Instead, follow these manual steps.

Step 1: Identify the exact hardware. Open the device case (if safe) and look for a small QFN-32 or QFN-48 chip labeled "CS-" or "CHIPS." If you see "CS198A," you have the right device.

Step 2: Download the correct driver. Go to the official ChipSailing repository (or trusted mirror like libusb.info). Search for CS198A Driver Package v2.1.0. Note: This driver is often bundled with the "Zadig" tool.

Step 3: Install via Zadig (Recommended for Win 10/11).

  1. Download Zadig (open-source USB driver utility).
  2. From the "Options" menu, select "List All Devices."
  3. Find "CS198A (Interface 0)" or "Unknown Device #1 (VID 1E3D PID 198A)" .
  4. In the target driver field, select:
    • For Serial communication: Select libusb-win32 or USB Serial (CDC).
    • For JTAG debugging: Select WinUSB.
  5. Click "Install Driver" .
  6. Repeat for Interface 1 and Interface 2 (if visible).

Step 4: Linux & macOS. Good news: Linux Kernel 5.4+ and macOS (with Homebrew) recognize this chip natively via the cdc_acm driver. Simply run:

sudo modprobe cdc_acm

Then check dmesg | grep 1e3d. It should mount as /dev/ttyACM0.

4. Troubleshooting & Context

If you are looking up this ID because the device is not working, consider the following:

Troubleshooting Common Issues

If you are searching for this ID because the device is not working, here are the top solutions:

  1. Drivers Not Installed: Windows 10/11 usually detect this automatically, but if it shows up as a generic disk, you need to install the Jio dashboard software from the virtual drive that appears.
  2. Linux Compatibility: On Linux systems (Ubuntu, Debian, etc.), the device may stay stuck in storage mode. You will need to use the usb_modeswitch utility to change the device from 1e3d:198a (storage) to its modem configuration.
  3. SIM Card Issues: If the device is recognized but cannot connect, ensure the SIM card is inserted correctly and has an active data plan.
  4. Port Failure: Try a different USB port. These modems require a stable power supply; a weak laptop battery or a broken USB port may prevent the modem from initializing.