Usb Device Id Vid 1e3d Pid 198a Updated

The USB device identified as mass storage device manufactured by Chipsbank Microelectronics Co., Ltd DeviceHunt Device Specifications Vendor (VID): 0x1E3D (Chipsbank Microelectronics Co., Ltd.) Product (PID): Device Name: ChipsBnk Flash Disk / HighSpeed Flash Reader USB 2.0 (High Speed) Controller Models: Frequently utilizes controller chips. Max Current: Usage and Known Issues Capacity Transparency:

This specific VID/PID combination is frequently found in generic or unbranded flash drives. In some documented cases, these controllers have been used in "fake capacity" drives (e.g., drives labeled as 2TB or 16TB that actually have much lower physical storage). Error Reports:

Recent user reports indicate issues such as the device being recognized but showing "No Media" (0 bytes capacity), often following partitioning attempts or firmware corruption. Performance: Speed tests recorded by tools like

show wide variability in read/write speeds depending on the actual NAND flash quality paired with the controller. Maintenance and Recovery usb device id vid 1e3d pid 198a updated

USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft

Based on the USB identifiers VID 1E3D and PID 198A, here is the post you requested. This information is typically relevant for firmware flashing or driver troubleshooting on Chipsbank / CBM based USB flash drives.

When Should You Replace the Hardware?

Sometimes the issue is not the driver. If after trying every updated driver the device still fails, consider hardware failure. The VID 1E3D PID 198A device is often a ribbon-cable-connected webcam. Symptoms of hardware failure include: The USB device identified as mass storage device

  • The device completely vanished from Device Manager (not even as unknown).
  • Code 45 (device not connected).
  • Physical damage to the lid or camera area.

In these cases, replacing the camera module ($15–$35 on eBay or from laptop spare parts vendors) is the solution.

Step-by-Step: Manual Driver Installation Using the VID/PID

If you still see an unknown device, here is the manual override:

  1. Open Device Manager.
  2. Find the device with the yellow exclamation. It may be under Other devices as “Unknown device.”
  3. Right-click it > Properties > Details tab.
  4. In the Property dropdown, select Hardware Ids.
  5. Confirm you see USB\VID_1E3D&PID_198A.
  6. Right-click the device again > Update driver > Browse my computer for drivers.
  7. Click Let me pick from a list of available drivers on my computer.
  8. Select Camera (or Imaging devices) from the list.
  9. Choose USB Video Device (Microsoft generic) or Integrated Camera (if listed).
  10. Click Next and let it install.

Note: The Microsoft generic driver is often less featured but highly stable. Many users report that the “updated” generic driver works better than the OEM one. When Should You Replace the Hardware

Problem 4: Windows Reports "This device cannot find enough free resources"

Cause: Interrupt conflict, often after a BIOS update.

Fix:

  • Shut down your laptop completely.
  • Unplug AC power and remove the battery (if removable).
  • Hold the power button for 60 seconds (drains residual charge).
  • Restart normally. The updated driver will reinitialize the hardware.

How to Safely Get the Updated Driver (Official Methods)

Warning: Do not download “driver updater” software from random pop-up ads. Many claim to have the latest VID_1E3D&PID_198A driver but instead bundle malware.

Here are the safe, verified methods:

How to identify the device on your system

  1. Connect the device and list USB devices:
    • On Linux: lsusb then lsusb -v -d 1e3d:198a to view descriptors.
    • On macOS: use system_profiler SPUSBDataType or ioreg -p IOUSB -l.
    • On Windows: open Device Manager, view device Properties → Details → Hardware Ids (look for VID_1E3D&PID_198A), or use USBView (Microsoft) for descriptor details.
  2. Inspect USB descriptors:
    • Look for Manufacturer, Product, SerialNumber strings and the device class/subclass/protocol fields to infer function (e.g., CDC/ACM = serial modem, Mass Storage = flash drive, Wireless LAN = network adapter).
  3. Check dmesg / system logs (Linux/macOS) or Windows Event Viewer for driver messages after plugging the device.

Troubleshooting "Driver Unavailable" or "Code 28" Errors

If after updating, you still see a yellow exclamation mark with The drivers for this device are not installed (Code 28), try the following: