Wegens vakantie zijn we gesloten van 20 december t/m 09 januari.
Wegens vakantie zijn we gesloten van 20 december t/m 09 januari.
Enter E-100U USB to Ethernet Adapter is a budget-friendly solution for adding 10/100 Mbps wired networking to devices lacking an RJ45 port. While it is highly affordable and portable, its older hardware architecture means driver compatibility can be a hurdle for modern operating systems. Key Specifications : USB 2.0 (backward compatible with USB 1.1). Ethernet Speed : 10/100 Mbps Fast Ethernet. : 1 x RJ45 Female port. : Bus-powered via USB; no external power source required. Duplex Support : Supports half and full-duplex 10/100 Mbps operations. Driver & OS Compatibility
The Enter E-100U was originally designed for older Windows environments. Accessing "free" drivers for newer systems often requires identifying the underlying chipset (commonly Plugable Technologies Official Support : Originally certified for Windows 98, Me, 2000, and XP Windows 7, 8, 10, & 11
: While not always native "plug-and-play," users can often find drivers on repositories like Driver Scape Realtek's official download site
: Support is limited; manual driver installation may be required for older kernels or macOS versions. : If your system doesn't recognize it, check Device Manager for the Hardware ID (e.g., VID_0FE6&PID_9700 ) to find the exact matching chipset driver. Review Insights Enter E-100U Driver | Tom's Hardware Forum
The Enter E-100U is a legacy USB 2.0 to Fast Ethernet adapter designed to provide a stable, wired network connection for devices lacking an integrated RJ45 port. It supports transfer rates of 10/100 Mbps and is often used to revive older PCs or add connectivity to modern laptops. Driver Download and Installation
While modern operating systems like Windows 10 and 11 typically include built-in drivers that automatically recognize the device, older systems or specific hardware versions may require manual installation.
Official Manufacturers: You can often find official driver packages on sites like Realtek (if using a Realtek chip) or D-Link for similar E100 models. usb to enet 10 100 mbps enter e100u driver free
Plug-and-Play: For most users on Windows 10/11, simply plugging the adapter into a USB port should trigger an automatic installation via Windows Update. Manual Update via Device Manager: Connect the adapter and open Device Manager.
Locate "USB 2.0 Fast Ethernet" under Network adapters or Other devices (marked with a yellow exclamation mark).
Right-click and select Update driver > Search automatically for drivers. Technical Specifications
The Enter E-100U is built for basic, reliable high-speed internet access. Enter E-100U USB to Ethernet Port (10/100) Cable (Blue)
Product details * About this Product. See more. * Top highlights. Compatible Devices. Desktop. Connector Type. RJ45 , USB. Colour. ENTER USB TO LAN CONVERTER (E 100U) - PTS JAIPUR |
This write-up describes USB-to-Ethernet adapters that provide 10/100 Mbps Ethernet over USB using common chipset families and the e100u driver ecosystem. It covers hardware, driver support, performance expectations, installation, licensing, and troubleshooting. Assumes typical consumer USB 2.0 adapters using ASIX or similar chipsets; specific chipsets vary by vendor. Enter E-100U USB to Ethernet Adapter is a
VID_0BDA = Realtek, VID_0B95 = ASIX.Example:
USB\VID_0BDA&PID_8152 → Realtek RTL8152
USB\VID_0B95&PID_7720 → ASIX AX88772
Important: You should never pay for hardware drivers. All drivers are provided free of charge by the chipset manufacturer or the device vendor. Below are the legitimate, safe, and free methods to obtain the driver.
Follow these steps to install the usb to enet 10 100 mbps enter e100u driver free on your PC:
Drivers are built into the kernel for RTL8152/AX88772:
cdc_ether, r8152, asix moduleslsusb for chip ID.If the adapter is not working out of the box:
lsmod | grep r8152The Enter E100U is a budget-friendly USB 2.0 to Ethernet adapter designed to provide a wired 10/100 Mbps network connection to laptops or desktops lacking an RJ45 port. Key Features Plug adapter into Windows PC
Plug-and-Play Simplicity: On modern systems like Windows 10/11, the adapter typically installs automatically without requiring a manual driver download, provided you have an active internet connection through another source (like Wi-Fi).
Dual-Speed Support: Supports both 10 Mbps and 100 Mbps Fast Ethernet standards (IEEE 802.3 and 802.3u).
Bus Powered: Draws power directly from the USB port, eliminating the need for an external power brick.
Broad Compatibility: While originally designed for older systems (Windows 98/ME/2000/XP), it is widely compatible with newer versions of Windows. How to Install Drivers (Free)
If your device does not recognize the adapter automatically, follow these steps to find the correct driver: Enter E-100U USB to Ethernet Port (10/100) Cable (Blue)