Vijeo Designer 6.2 Reference and Serial Number Guide Navigating the installation and registration process for Schneider Electric's HMI configuration software, Vijeo Designer 6.2, requires a clear understanding of the reference and serial numbers. These identifiers determine your software’s functionality and licensing level. 1. Locating Your Serial and Reference Numbers
To license Vijeo Designer 6.2, you need both a Reference Number (the part number) and a Serial Number.
Physical Media: These numbers are typically printed on a label on the DVD-ROM sleeve or the USB flash drive case.
Digital Purchase: If you purchased a digital license, look for these details in your confirmation email or on the invoice and delivery note.
Registered Installations: If the software is already installed, you can find the serial number by launching the Vijeo Designer License Manager from the Start menu and navigating to the "Enter received Authorization code" section. 2. Standard Reference Numbers for Vijeo Designer 6.2
Depending on your license type, you will use one of the following official Reference Numbers: Single User License: VJDSNDTGSV62M Team License (10 Users): VJDTNDTGSV62M Facility License (Unlimited Site Users): VJDFNDTGSV62M Standard PC Runtime: VJDSNRTSPC 3. Installation Modes
The combination of numbers you enter during the InstallShield Wizard determines the software's mode:
Limited Edition: Leave both the Reference and Serial Number blank. This allows full configuration but only supports downloading to HMISTO and HMISTU series HMIs.
Trial Mode: Use Reference Number VJDSNDTGSV62M and any 11-digit numeric serial number (e.g., 01234567890). This grants full functionality for 21 days.
Fully Licensed: Enter the unique purchased numbers to remove all time and download restrictions. 4. Activation and Registration Process
Once the software is installed, you must activate it to ensure permanent access:
To install or register Vijeo Designer 6.2, the required reference and serial numbers depend on the version you intend to use. Installation Modes
According to Schneider Electric Support, you can use the following details during the installation wizard: Trial Mode: Full functionality for 21 days. Reference Number: VJDSNDTGSV62M vijeo designer 6.2 reference and serial number
Serial Number: Use any 11 numeric digits (e.g., 01234567890).
Limited Edition: Allows full configuration but restricts downloads only to HMISTO and HMISTU series. Reference Number: Leave blank. Serial Number: Leave blank. Fully Licensed:
Use the unique Reference Number and Serial Number provided with your purchased DVD or emailed license. Registration and Management
Once installed in licensed mode, you must register the software to remove time or download restrictions:
Launch the License Manager via the Windows Start menu (typically under Schneider Electric > Vijeo Designer 6.2).
Enter the required details: Registered Username, Email Address, and the License serial number.
The tool will guide you through receiving an Authorization Code via web or phone to finalize the registration. Troubleshooting
If you are unable to enter a new serial number (e.g., after a trial expires), you may need to clear the registry path HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Schneider Electric\Vijeo-Designer62B\ before re-installing the base version and entering your purchased credentials.
Registration and activation for Vijeo Designer 6.2 require a unique Reference Number (part number) and Serial Number, typically provided on the original DVD sleeve or via email following a digital purchase. Common Reference Numbers for Vijeo Designer 6.2
Depending on your license type, the following reference numbers are frequently used during installation: Single User License: VJDSNDTGSV62M. Group License: VJDGNDTGSV62M.
Generic Runtime Upgrade: VJDHTGTSPV62M (used to enable the Generic Windows PC runtime).
Newer Runtime Licenses (SP11+): VJDRPCCZLSPMZZ or VJDHPCCZLSPMZZ. How to Locate Your Existing Serial Number Vijeo Designer 6
If you have already installed the software and need to retrieve your serial number for re-registration:
License Manager Tool: Launch the "License Manager" or "Registration Wizard" from the Schneider Electric folder in your Start menu.
Runtime Path: C:\Program Files (x86)\Schneider Electric\Vijeo-Designer 6.2\Vijeo-Runtime\Registration\RegistrationWizard.exe.
Buildtime Path: C:\Program Files (x86)\Schneider Electric\Vijeo-Designer 6.2\Vijeo-Frame\Registration\RegistrationWizard.exe.
In-App Check: Open Vijeo Designer, go to Help > About, and check the License tab.
To find the reference and serial numbers for Vijeo Designer 6.2, you generally need to look at your physical media, digital license certificate, or the software registration screen. 📍 Where to Find Your Credentials
Software Box/DVD Sleeve: Look for a sticker on the back or inside the case.
License Certificate: A PDF or paper document sent via email after purchase.
Schneider Electric Portal: Log into the License Manager if you registered online. Current Installation: Open Vijeo Designer. Go to Help > About.
The serial number is often partially masked here for security. 🔑 Common Reference Numbers
Reference numbers identify the type of license you bought. Common Vijeo Designer 6.2 codes include: VJDSNDTGSV62M: Single user license. VJDSUDRTGPCV62M: Runtime license for Windows PCs. VJDSNTRGSV62M: Team/Group license (multiple users). VJDUPGRGV62M: Upgrade license from a previous version. ⚙️ How to Register or Transfer If you have the numbers but need to activate the software:
Launch Schneider Electric License Manager: Usually installed alongside the software. Activation: Choose "By Web" for the fastest result. ABCDE-FGHIJ-KLMNO-PQRST-UVWXY ). In practice
Enter Data: Input the Serial Number and Activation ID (received at purchase).
Transfer: To move the license to a new PC, use the "Return License" option in the manager first. ⚠️ Important Security Note
Avoid "Cracks": Using generators or public serials can inject malware into your industrial control system.
Support: If you lost your numbers, contact Schneider Electric Support with your original purchase order or company details to recover them. To help you get the software running or integrated: Are you performing a fresh installation or an upgrade?
In Vijeo Designer 6.2, the Reference is not a license key. It is the exact catalog number of the target HMI (e.g., HMIGTO3510, HMISTU855, HMISCU8B5). This tells the software which screen size, resolution, and firmware features to compile for.
When Alex changed the HMI model from a broken HMIGTO3510 to a newer HMIGTO5310, he had to manually update the Target Reference in the project settings. He learned that simply changing the reference could break screen alignments and script calls—so he used the "Change Target" wizard carefully.
Even experienced engineers encounter issues. Below is a systematic troubleshooting guide.
A: No – the standard license (reference ending in V) is node-locked to a single PC. For multiple developers, you need a floating license (reference ending in F) and a license server.
When you purchase Vijeo Designer 6.2, you receive a 25-character alphanumeric code (e.g., ABCDE-FGHIJ-KLMNO-PQRST-UVWXY). In practice, most engineers call this the "serial number," though Schneider officially terms it a Product Key.
Where to find it:
How to use it: This key is entered during installation or via the "License Manager" utility. It is used to generate a license.txt or licfile.dat file that is bound to your PC’s hardware ID.