Menü Schließen

Manual — Weltouch Cy-210b

The Miyachi Weltouch CY-210B Go to product viewer dialog for this item.

is a constant-current AC resistance welding controller. It is designed for precise industrial welding applications, offering advanced monitoring and feedback features to ensure consistent weld quality. Key Technical Features

provides several standard functions for high-performance welding:

Constant Current Control: Utilizes secondary constant current feedback to maintain stable output even with fluctuations.

Weld Monitoring: Features built-in monitors for weld current, conduction degree, and error detection for real-time data viewing.

Weld Schedules: Supports up to 15 distinct weld schedules that can be programmed directly.

Programmable Sequence: Standard functions include pulsation, up/down slope, forge delay, and pre/post-heat settings.

Dual Valve Outputs: Includes two valve output signals and nine stepper settings for increased operational flexibility. Operational Guidelines According to technical addendums from Amada Weld Tech:

Foot Switch Connection: To connect a dual-level foot switch, Level One and Level Two wires must be verified with a continuity checker and connected to specific screw terminals (e.g., screw #6 for common wires).

DIP Switch Settings: The internal DIP switch (DSW1-3) determines output behavior; turning it OFF sets it for a weld checker (like the MM-356A), while turning it ON enables flicker output. weltouch cy-210b manual

Start Sequence: A "Start P" input must be turned on to begin the squeeze (SQ) period.

Automatic Shut-off: The unit may feature a 200 msec T2 timer if the start signal is removed prematurely. Successor Model

has largely been replaced by newer versions like the CY-210D and the current CY-210E, which maintain the same horizontal configuration but add updated digital interfaces and expanded current monitoring ranges up to 80,000 A.

For specialized non-contact temperature measurement products often confused with this industrial controller, you can refer to manuals like the ennoLogic eT210B for body infrared thermometers.

Weltouch CY-210B (manufactured by Amada Weld Tech, formerly Miyachi) is a secondary constant-current AC resistance welding control. While no specific "blog post" exists for it, the official technical manuals and data sheets provide comprehensive details on its operation and maintenance. Manual & Technical Documentation

You can access the official documentation directly from the manufacturer and authorized distributors: Official Addendum & Manual: Amada Weld Tech provides the CY-210B User's Manual Addendum

, which includes critical terminal block identification and wiring instructions for single-level foot switches. Timing and DIP Switch Settings:

For specific power-on timing and flicker output configurations, refer to Addendum B Key Technical Specifications According to TJ Snow Company , the CY-210B features: Monitoring:

Built-in weld, conduction degree, and error monitors to view programmed vs. actual data simultaneously. Standard Functions: The Miyachi Weltouch CY-210B Go to product viewer

Supports two-stage initiation, pulsation, up/down slope, forge delay, and pre/post-heat. Programming:

Allows for 15 weld schedules, 2 valve output signals, 9 steppers, and direct programming of actual weld current. Quick Setup Guide: Foot Switch Connection

If you are wiring a single-level foot switch, follow these steps from the Amada Weld Tech manual

Use a jumper wire (minimum 24 AWG), roughly 1 to 4 inches long. Connect one end of the jumper to on the terminal block.

Connect the other end of the jumper wire and one wire from the foot switch to

Consult the labels near the terminal block to confirm screw identification before powering the unit. or configuring a weld schedule for this unit? Resistance Welding Engineer Technical Writer

Based on the typical functionality of the Weltouch CY-210B, which is a Capacitive Touch/Proximity Switch (often used in applications like sensor faucets, smart home devices, or industrial controls), the primary "informative feature" is its Status Indication System.

For a device without a screen, its ability to convey information relies entirely on visual and output signals. Here is the breakdown of its informative features:

How to Enter Advanced Settings:

  1. Switch Mode to Off.
  2. Press and hold both Up and Down buttons simultaneously for 5 seconds.
  3. The screen will show a two-digit code (often "01").

1. LED Status Indication (Visual Information)

The most prominent informative feature is the built-in LED, which communicates the operational state of the device to the user. Switch Mode to Off

  • Power-On Confirmation: Upon powering the device, the LED typically flashes once or remains solid for a moment to indicate the system has initialized successfully.
  • Standby Mode: When the device is powered but not engaged, the LED is usually off (or dim) to indicate readiness and low power consumption.
  • Active/Triggered State: When the sensor detects a touch or proximity event, the LED illuminates (typically solid bright). This informs the user that:
    • The sensor has successfully detected their input.
    • The signal has been sent to the controller (e.g., to open a water valve or turn on a light).
  • Low Voltage Warning (Battery Models): If the CY-210B is running on battery power, the LED may flash repeatedly or fail to light upon touch, informing the user that the batteries require replacement.

Hardware Overview:

  • LCD Display: Shows current temperature, set temperature, time, day, and mode (Heat/Cool/Auto/Off/Fan).
  • Up/Down Buttons: Adjust the set temperature or navigate through menu options.
  • Mode Button: Toggles between Heat, Cool, Auto, and Off.
  • Fan Button: Switches fan between Auto and On.
  • Set/Program Button: Enters program scheduling and adjusts advanced settings.
  • Battery Compartment: Located on the back (requires 2x AA batteries; some models use AAA). This also retains memory during power outages.

3. Troubleshooting Common Issues

Issue 1: Unresponsive Touch Panel

  • Solution:
    • Check connections (ensure SDA/SCL are secure).
    • Verify power supply stability (use a multimeter).
    • Recalibrate using the touch tool.

Issue 2: Inconsistent Touch Detection

  • Solution:
    • Adjust sensitivity in the firmware (e.g., increase INT_THRESH).
    • Test with a different microcontroller to rule out software errors.

Issue 3: Communication Errors

  • Solution:
    • Confirm the I2C address is correct (default: 0x8C).
    • Reseat the controller or use pull-up resistors (4.7kΩ) on SDA/SCL lines.

Issue 4: Ghost Touches

  • Solution:
    • Improve grounding.
    • Adjust filtering registers to reduce noise.

Soft Reset (Preserves schedule):

  • Remove batteries.
  • Wait 1 minute.
  • Reinsert batteries. Time/date will need resetting, but schedules remain.

9. Is the Weltouch CY-210B Still Worth Buying? (2024-2025 Update)

Given the lack of an accessible manual, many wonder if this is a smart purchase. Compared to newer Bluetooth scales, the CY-210B remains relevant for three reasons:

  1. Repairability: The load cell is a standard 10g-200g type, replaceable for $5.
  2. Speed: 2-second stabilization is faster than many $50 scales.
  3. No forced apps: Unlike modern “smart” scales, it just works.

Downside: The missing manual means you must save this article or bookmark it. Without calibration knowledge, the scale becomes useless within months.

Symptom 3: Works in BIOS but not in OS

  • Fix: Disable "Fast Startup" in Windows Power Options.
  • Fix: In Linux, blacklist the usbhid driver and use hid-multitouch instead.

Step 3: Calibration (How to Fix Inaccurate Touches)

If your touches register about 1 inch away from your finger:

  1. Open eGalaxTouch Utility (installed with the driver).
  2. Go to Tools > Calibration.
  3. Touch the red crosshairs precisely as they appear.
  4. Save the calibration.

For Mac/Linux: Calibration is usually automatic, but you can use xinput_calibrator on Linux.