Ws-1958bt Music Car Speaker Manual ((full)) [ PRO | WALKTHROUGH ]

Turn on the speaker; it defaults to Bluetooth mode (indicated by flashing lights or a sound). Enable Bluetooth on your phone and search for " " or similar.

Select the device to pair. Once connected, you can stream music or take calls.

Mode Selection: Use the M (Mode) button to cycle between Bluetooth, FM Radio, USB, and TF card modes. FM Radio: Switch to FM mode. Press and hold the Play/Pause button to auto-scan stations. Use the "Next/Previous" buttons to switch saved stations. Charging: Connect the included USB cable to a

power source. A charging indicator light will typically stay on until fully charged. Troubleshooting

Not Turning On: Ensure the battery is charged. If it only works while plugged in, the internal battery may be depleted.

Pairing Issues: Clear your phone's Bluetooth cache and ensure the speaker is not already connected to another nearby device. WS-1958BT - Car MODEL SPEAKER

WS-1958BT Music Car Speaker Manual: A Comprehensive Guide

Are you excited to upgrade your car's audio system with the WS-1958BT music car speaker? Look no further! This manual will walk you through the installation, setup, and operation of your new speaker system. ws-1958bt music car speaker manual

Introduction

The WS-1958BT is a high-quality music car speaker designed to provide clear and powerful sound in your vehicle. With its sleek design and easy-to-use interface, this speaker system is perfect for music lovers who want to enjoy their favorite tunes on the go.

Package Contents

• 1 x WS-1958BT speaker unit
• 1 x Mounting bracket
• 1 x User manual
• 1 x Warranty card

Installation

Before you start, make sure you have the necessary tools and follow these steps:

1. Choose a location: Select a suitable location for your speaker, taking into account the cable length and mounting bracket placement. Typically, speakers are installed on the rear deck or side panels of the car.
2. Mount the bracket: Use the provided screws to mount the bracket to the chosen location. Ensure it is securely fastened.
3. Install the speaker: Place the speaker unit onto the mounting bracket and secure it with the provided screws.
4. Connect the wiring: Connect the speaker wires to the car's audio system or amplifier. Make sure to match the positive and negative terminals.

Setup and Operation

1. Power on: Turn on your car's audio system or amplifier.
2. Select the input: Choose the correct input source (e.g., AUX, Bluetooth, or USB).
3. Pairing: If using Bluetooth, enable Bluetooth on your device and search for the WS-1958BT. Select the speaker from the list of available devices and enter the pairing code (default: 0000).
4. Adjust settings: Adjust the volume, bass, and treble to your liking.

Features and Functions

• Bluetooth connectivity: Stream music wirelessly from your device.
• AUX input: Connect external devices using a 3.5mm audio cable.
• USB input: Play music from a USB drive.
• Equalizer settings: Customize your sound experience with adjustable bass, treble, and balance.

Troubleshooting

• No sound: Check the wiring connections, ensure the speaker is properly installed, and adjust the audio settings.
• Distorted sound: Adjust the equalizer settings or check for nearby electrical interference.
• Bluetooth connectivity issues: Restart the speaker and device, re-pair if necessary.

Maintenance and Care

• Clean the speaker: Regularly wipe the speaker with a soft cloth to prevent dust buildup.
• Avoid exposure to water: Protect the speaker from water and extreme temperatures.

Warranty and Support

The WS-1958BT music car speaker comes with a [insert warranty period] warranty. For any questions, concerns, or technical support, please visit our website or contact our customer support team.

Conclusion

Congratulations on purchasing the WS-1958BT music car speaker! With this manual, you're ready to enjoy high-quality sound in your vehicle. If you have any questions or need assistance, don't hesitate to reach out. Happy listening!

Note: The WS-1958BT is a popular generic or OEM (Original Equipment Manufacturer) model, often associated with vintage-style car audio players or motorcycle audio systems. While specific button layouts may vary slightly depending on the brand affixed to the unit (such as Vtin, Pyle, or unbranded generics), the functionality described below covers the standard architecture of this device.

The Wiring Loom (Back/Side)

• Red Wire: Connects to the vehicle’s DC 12V positive terminal (often the ignition switch or accessory wire).
• Black Wire: Connects to the vehicle’s Ground (negative terminal).
• (Optional on some models) Blue Wire: Usually intended for connecting an external amplifier or power antenna.

Quick-reference checklist before purchase/installation

• Measure mounting depth and diameter.
• Confirm impedance and power ratings match your system.
• Check whether tweeters are coaxial or separate component.
• Ensure included hardware fits your vehicle or purchase adapters.

If you want, I can: a) draft a printable step-by-step installation sheet tailored to a specific vehicle make/model, b) extract exact specs from the unit label if you upload a photo, or c) produce wiring diagrams for coaxial vs component setups — tell me which.

Related search suggestions saved.

The WS-1958BT music car speaker is a portable Bluetooth device designed with a unique "taxi car" or classic car aesthetic. This manual covers everything from initial setup and pairing to advanced features like FM radio and hands-free calling. 1. Key Features and Technical Specifications Before diving into the operations, Audio Output: 6W total (2 x 3W stereo speakers). Battery: 1800mAh internal rechargeable battery. Frequency Range: 100Hz – 18KHz.

Playback Time: Approximately 90 to 130 minutes on a full charge.

Functions: Bluetooth 5.0, FM Radio, USB Drive support, TF (MicroSD) Card reader, AUX input, and a selfie shutter mode. 2. Getting Started: Power and Charging

To ensure optimal battery health, charge the device fully before its first use. is a car-shaped portable wireless speaker designed by

Charging: Connect the provided USB cable to the DC 5V port on the speaker and a standard USB power adapter.

Indicators: An LED indicator will light up during charging. It typically takes 2–3 hours to reach a full charge.

Power On/Off: Use the main power switch (often labeled "M" or located on the back/bottom) to turn the device on. You will hear an audible prompt or see the LED screen light up. 3. Bluetooth Pairing Instructions

The WS-1958BT uses Bluetooth 5.0 for a stable connection up to 10 meters.

Enter Pairing Mode: Turn the speaker on. It will automatically default to Bluetooth mode and a flashing light or voice prompt will indicate it is ready to pair.

Connect Device: Open the Bluetooth settings on your smartphone or tablet and scan for new devices.

Select "WS-1958BT": Choose the speaker's name from the list. Once connected, the LED will stop flashing and you will hear a confirmation tone. 4. Playback Modes and Controls

The speaker supports multiple audio sources, which can be toggled using the Mode (M) button: WSTER WS1958BT Portable Bluetooth Car Speaker

3. Bluetooth Pairing * Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.

The controls are typically located on the top or "trunk" area of the car model.

Power On/Off: Long-press the M/ button (or designated Power button). An engine sound often plays upon startup.

Mode Switching: Short-press the M/ button to cycle through Wireless (Bluetooth), FM Radio, USB, and TF (SD card) modes. Volume Control: Volume Up: Long-press the ▶H/V+ button. Volume Down: Long-press the H◄/V- button. Track/Station Navigation: Next Song/Station: Short-press ▶H/V+. Previous Song/Station: Short-press H◄/V-. Bluetooth Pairing & Hands-Free

Pairing: Turn the speaker on. It defaults to "Bluetooth play state," and lights will flash. On your mobile device, search for "WS-1958BT" (or similar "WS" name) and select it to connect.

Calls: When connected via Bluetooth, short-press the Play/Pause button to answer an incoming call; long-press to hang up.

TWS Mode (Connecting Two Speakers): Turn on two speakers, double-click the Play/Pause button on one, and wait for them to "tick" and sync for stereo sound. FM Radio Operation Switch to Radio mode using the M button.

Long-press the Play/Pause button to initiate an auto-channel search. The speaker will automatically scan and save available stations. Use the Previous/Next buttons to navigate saved stations. Charging & Specifications

Charging: Connect the included USB cable to the mini-USB/Type-C port. A red LED usually indicates charging and turns off when full. Play Time: Approximately 2–3 hours on a full charge. Battery: Built-in 1800mAh 18650 battery. Output Power: 2 x 3W (6W total).

Special Features: Working rubber wheels, RGB flashing headlights, and a built-in "selfie" mode (controlled by volume buttons when in camera mode on your phone).

For official digital versions, you can find the WS-1958BT Instruction Manual and related car-model guides on Manuals+. WS-1958BT - Car MODEL SPEAKER

The WSTER WS-1958BT is a portable, car-shaped Bluetooth speaker known for its vintage aesthetic, featuring functional LED headlights and taillights. It serves as a versatile multimedia device with support for Bluetooth 5.0, FM radio, USB, and TF cards. Core Operation Guide Go to product viewer dialog for this item. 1 x WS-1958BT speaker unit 1 x Mounting

Fuzix WS-1958 Car Bluetooth Portable Speaker, Retro Car-Style Wireless Stereo Speaker with LED Headlights and Taillights, AUX/USB/TF/FM Radio Support

Color: Green Operating Voltage: ≤36V Power Mode: USB Electronics,Home Audio,Speakers,Bluetooth Speakers Blue,Green,Pink,Red,White, WS-1958BT - Car MODEL SPEAKER

The WS-1958BT is a car-shaped, portable Bluetooth 5.0 speaker featuring USB/TF card playback, FM radio, hands-free calling, and a unique Bluetooth selfie remote shutter function. It offers roughly 2x3W to 2x5W output power with a 1200mAh-1800mAh battery, operated via top-mounted controls for mode switching and volume adjustment. Read the full product specifications at AliExpress WS-1958BT - Car MODEL SPEAKER

The Go to product viewer dialog for this item. is a portable car-shaped Bluetooth speaker designed with a retro aesthetic (often resembling a Beetle or Taxi model) that combines novelty decor with modern audio features. 1. Key Features & Controls

This device operates via several physical keys typically located on the top or rear of the vehicle body:

Mode Selection (M): Cycles through Bluetooth, FM Radio, USB, and TF/MicroSD modes.

Media Playback: Includes dedicated buttons for Play/Pause and Next/Previous track.

Volume Control: Long-pressing the "Next" or "Previous" buttons generally adjusts the volume.

Extra Functions: Supports hands-free calling with a built-in microphone, a Bluetooth "selfie" remote function for your phone, and the ability to record or delete audio. 2. Technical Specifications Bluetooth Version 5.0 (supports music, calls, and selfie) Speaker Output

Dual 3W or 5W stereo drivers (depending on specific model variant) Frequency Response 100Hz – 18KHz Battery Capacity 1800mAh (built-in 18650 rechargeable battery) Charge Voltage 5V (USB standard) Inputs

TF/MicroSD Card, USB Flash Drive, 3.5mm AUX, DC 5V (charging) 3. Operational Guide WS-1958BT - Car MODEL SPEAKER

I'm glad you're looking for the manual for the WS-1958BT music car speaker. However, I want to be upfront: WS-1958BT appears to be a generic or off-brand model number (often sold under various names like "Wish," "Pyle," or no-name units on Amazon, eBay, or AliExpress). Because of that, an official manual from a single manufacturer is very hard to find.

That said, I can help you get the information you need. Here is a good, practical post on how to find the manual or the key functions yourself.

Part 6: Troubleshooting Common Problems (WS-1958BT Manual Antidote)

If your speaker is not behaving as expected, consult this expanded troubleshooting section:

| Problem | Likely Cause | Solution (from manual logic) | |---------|--------------|-------------------------------| | No power | Blown fuse in cigarette plug | Unscrew the tip of the 12V plug. Replace the glass fuse (2A, 250V). | | Bluetooth not finding device | Speaker is in FM or AUX mode | Press Mode until blue LED flashes rapidly. | | Sound distorted | Volume too high or low voltage | Reduce volume. Check car battery voltage (>11.5V). | | USB stick not reading | Format incompatible or over 32GB | Reformat USB to FAT32. Use 32GB or smaller. | | Microphone no sound | Echo set to zero | Press Echo then Volume Up to level 3 or higher. | | Remote control not working | Dead battery or IR sensor blocked | Replace CR2025 battery. Clean the IR window on speaker. | | Speaker turns off randomly | Overheating protection | Allow unit to cool. Ensure ventilation holes are not covered. |

The Front Panel

• Display Screen: Shows the FM frequency, track number, volume level, or incoming caller ID.
• Mode Button (M): Switches between Bluetooth, USB, TF Card, FM Radio, and AUX modes.
• Previous/Volume Down (◀||): Short press to skip to the previous track; long press to decrease volume.
• Next/Volume Up (||▶): Short press to skip to the next track; long press to increase volume.
• Play/Pause/Answer Call (▶||): Starts or pauses music. Press once to answer an incoming call; long-press to hang up or reject a call.
• USB Port: For inserting USB flash drives.
• TF Card Slot: For inserting Micro SD cards.
• AUX Input: 3.5mm jack for wired external devices.
• Microphone: Usually located near the control panel for hands-free calling.

Chapter 7: Troubleshooting Common WS-1958BT Problems

Even quality units can have hiccups. Here are fixes for the most frequent user complaints.

Problem 3: No sound from FM radio, only static.

Solution: Extend the black antenna wire fully. Move the unit away from USB chargers or dashcams (they cause interference). Perform a new auto-scan in a different location (e.g., open parking lot).

6. Button Functions Overview

While button layouts vary slightly by manufacturer batch, standard controls include:

• MODE: Cycles between Bluetooth, USB, TF Card, and FM.
• PHONE: Answers or hangs up incoming calls.
• VOL + / -: Adjusts volume. (Note: Long-pressing often skips tracks).
• EQ: Cycles through sound presets (Pop, Rock, Jazz, Classic).

Part 3: Physical Layout and Button Functions

Refer to your WS-1958BT unit. The control panel is typically located on the top or front edge. Here is the standardized legend:

| Button/Slot | Symbol | Function | |-------------|--------|-----------| | Power | ⏻ (circle with line) | Long press (3 sec) to turn ON/OFF. Short press to mute. | | Mode | M | Switch between BT, USB, SD, FM, AUX, and LINE-IN. | | Play/Pause | ▶/❚❚ | In BT/USB/SD: play/pause. In FM: auto-scan and store stations. | | Previous | ⏮ | Short press: previous track. Long press: volume down. | | Next | ⏭ | Short press: next track. Long press: volume up. | | LED | Light bulb icon | Cycle through LED modes: off, beat-sync, slow fade, color cycle. | | Echo | Mic icon + wave | Adjust echo level for the microphone (press + volume keys). | | Microphone Jack | 3.5mm female | Plug in included wired mic. | | USB Port | Standard Type-A | Max 32GB USB drive, FAT32 format. | | SD Card Slot | Micro SD/TF | Max 32GB microSD card. | | AUX IN | 3.5mm stereo | For non-Bluetooth devices (phone, MP3 player). | | DC IN | 12V barrel jack | Connect the car cigarette lighter cable. |