The XK3190-C801 Go to product viewer dialog for this item. is a high-precision weighing indicator and controller, often part of the Shanghai Yaohua (Yaohua) series. While specific "C801" manuals are often listed under the broader XK3190-C8 series, they share core technical parameters and operational logic. Technical Specifications Accuracy Class: Class III,
A/D Conversion: High-speed conversion (up to 80 times/second). Load Cell Connection: Supports 1 to 8 load cells (350 Ωcap omega
); uses a 6-wire system for automatic long-distance compensation. Display: 7-digit LED with 11 status indicator lamps. Interfaces: Standard RS232/RS422 serial communication. Analog output (0-10V or 4-20mA). 3 relay outputs and 3 digital inputs for control. Operational & Control Modes
The device is designed for industrial batching and check-weighing with several software-configurable modes: Mode 1: One-component coarse/fine discharge controller.
Mode 2: Two-component feed/discharge controller with dribble function. Mode 3: Loss-in-weight feed controller. Mode 4: Check-weigher controller. Calibration & Troubleshooting
Calibration typically involves entering a protected mode to define division, capacity, and load points. C8 User Manual PDF | Parameter (Computer Programming)
Getting the most out of your industrial equipment often comes down to having the right documentation on hand. For operators and technicians using the Yaohua XK3190-C801
weighing indicator, a manual is essential for everything from initial setup to precision calibration.
Below is a blog post draft that provides a guide to this industrial tool and where to find its essential documentation. Essential Guide to the XK3190-C801 Weighing Indicator
In high-precision industrial environments, the reliability of your weighing indicator can make or break your process. The Yaohua XK3190-C8 series, specifically the
, is a workhorse in the world of batching and catch-weighing scales. But even the best hardware is only as good as its configuration. Key Features of the XK3190-C8 Series is designed for speed and accuracy, utilizing high-speed A/D conversion technology. Major highlights include:
Versatility: Supports additive, subtracting, and catch-weighing modes.
Connectivity: Standard RS-232/422/485 serial communication for integration with PCs and printers.
Control Power: Features 3 inputs and 3 output relays for automated control systems. xk3190c801 manual free
Precision: High A/D conversion speed (up to 80 times/second) ensures real-time accuracy. Finding the XK3190-C801 Manual for Free
If you’ve lost your paper copy, several digital repositories provide the full manual or technical specification sheets for free: Internet Archive: You can find the XK3190-C8 Weight Instruction Manual for free download or online streaming. The Checkout Tech: Provides a downloadable PDF
of the user manual and a table of contents to help you find specific chapters. Scribd: Often hosts community-uploaded versions of the XK3190-C8 User Manual , though a free account may be required for full access. Quick Calibration Tips
While the manual contains the full sequence, most XK3190 models follow a similar logic for calibration: XK3190-C8 Weighing Indicator Manual | PDF - Scribd
Breaking down the name: "xk3190" might be the product line, and "c801" could be a specific model or variant. The "manual" part indicates the user is looking for user or technical documentation. They want it for free, so they might be trying to find it online without purchasing.
Possible products with such a model number: I recall that some companies use similar naming conventions for optical sensors, proximity sensors, or similar devices. For example, companies like Baumer, Sick, or Omron have sensors with model numbers in that style. The "c801" could relate to a specific category, like a sensor for conveyor belts or automated systems.
Why a user would need this manual: They might be using the device for an industrial application and need setup instructions, technical specs, or troubleshooting information. Since they want it for free, they might be a self-taught enthusiast, a technician, or someone trying to avoid buying the manual.
I should consider that they might not know exactly what the product is. So the write-up should explain possible uses of such a sensor, why a manual is important, and guide them on how to find it. Also, emphasize caution about using counterfeit manuals or pirated documents, which can be legally problematic and inaccurate.
Steps to guide them: Check the manufacturer's website, contact support, look on technical document platforms like manualslib.com, check forums or community boards. Maybe they can find user reviews or technical articles that reference the same model.
Also, maybe warn them that without knowing the exact context (like manufacturer or application), the information could be speculative. If they provide more details, maybe they can get a more accurate guide.
I should structure the write-up to first explain what the product might be, then discuss the importance of having a manual, outline where to find it for free, and offer tips for using it effectively. Maybe add a section on creating a digital copy for reference if they have a physical manual. Also, mention safety and legal considerations when using free resources.
Need to make sure the language is clear and helpful, avoiding technical jargon where possible. Maybe include examples of companies that have similar products to help the user cross-reference. Also, perhaps suggest that if they can't find it, they might benefit from purchasing an official copy to ensure accuracy and reliability.
Here’s a comprehensive guide to help you understand and locate documentation for the "xk3190c801 manual", including tips for accessing it for free and ethical considerations. Since the product or device associated with this identifier isn’t widely documented online, the response includes general strategies and insights into potential use cases for similar systems or hardware. The XK3190-C801 Go to product viewer dialog for this item
The XK3190 series is produced by Shanghai Yaohua Weighing System Co., Ltd. (often branded as "Kingbird").
XK3190-C801.Since direct hosting is restricted, here is the best method to get the physical PDF file:
If you need the wiring diagram specifically:
Disclaimer: This guide is for informational purposes. Calibration procedures can vary based on the specific software version of your board. Always refer to the official manufacturer documentation for critical commercial applications.
Finding a reliable, free version of the XK3190-C801 weighing indicator manual can be a challenge, as these industrial components are often serviced by specialized technicians. This guide provides an overview of the device's core functions, calibration steps, and where to find the full documentation. What is the XK3190-C801?
The XK3190-C801 is a high-performance weighing indicator commonly used in industrial batching, filling, and weighing systems. It is known for its high precision, stability, and versatility in handling various load cell signals. Key Features
High-Speed A/D Conversion: Ensures rapid response times for dynamic weighing.
Multiple Interface Options: Often includes RS232, RS485, and current loop outputs.
Batching Control: Supports multi-material batching and automated filling cycles.
Rugged Design: Built to withstand harsh industrial environments. Core Functions and Settings
When you download an XK3190-C801 manual, you will primarily use it for three main tasks: parameter configuration, calibration, and troubleshooting. 1. Initial Setup
The manual details how to set the decimal point, division value (increment), and the maximum capacity of your scale. These must be set before calibration to ensure accurate readings. 2. Wiring Diagram
Connecting the load cells correctly is critical. The manual provides a pin-out diagram for the 9-pin or 15-pin connectors: Excitation (+/-): Powers the load cell. Breaking down the name: "xk3190" might be the
Signal (+/-): Receives the millivolt output from the load cell. Shield: Protects against electrical interference. 3. Calibration Procedure Calibration usually follows these general steps:
Enter the calibration mode via a specific key combination (often involving a "Function" or "Set" key while powering on). Perform a "Zero Calibration" with no weight on the scale. Perform a "Span Calibration" using a known test weight. Input the test weight value into the indicator. Common Error Codes
If your indicator shows an error, the manual is your best friend for diagnosis. Common codes include: Err 01: Overflow—the weight exceeds the maximum capacity. Err 02: Zero point is too high during calibration. Err 05: Load cell signal is unstable or disconnected. Where to Find the XK3190-C801 Manual for Free
Since these indicators are manufactured by various companies (most notably Yaohua), you can often find PDFs on the following types of sites:
Manufacturer Websites: Check the official Yaohua Weighing System website under their "Download" or "Support" sections.
Industrial Automation Forums: Sites like Control.com or various CNC forums often have members who share PDF copies.
Scribd or DocPlayer: These document-sharing platforms frequently host industrial manuals uploaded by users.
Supplier Catalogs: Companies that sell load cells often provide the indicator manuals as a value-add for their customers.
If you suspect the device is from a major brand (e.g., Baumer, Sick, Omron, Siemens, or Honeywell), search their documentation hubs:
Use the "Support" or "Download Center" sections to search for manuals by product category.
| Spec | Value | |------|-------| | Sensor Type | CMOS, 8‑MP (3840 × 2160) | | Pixel Size | 2.4 µm × 2.4 µm | | Interface | Gigabit Ethernet (RJ‑45), USB‑3.0, optional HDMI | | Power | 12 V DC, 2 A max (or 100‑240 VAC via AC adapter) | | Operating Temperature | 0 °C – 45 °C | | Ingress Protection | IP54 (dust‑protected, splash‑proof) | | Weight | 1.2 kg (≈ 2.6 lb) | | Dimensions | 150 mm × 120 mm × 80 mm (W × H × D) | | Compliance | CE, FCC Part 15, RoHS, UL 60950‑1 |
(If your specific unit differs (e.g., a different sensor or form factor), replace the rows accordingly.)
| Connection | Cable Type | Polarity / Pinout | Notes | |------------|-----------|-------------------|-------| | Power Input | IEC‑C13 (or proprietary 12 VDC barrel) | L‑N‑E (for AC) or +‑‑ (for DC) | Verify voltage range (e.g., 100‑240 VAC, 50/60 Hz). Use the supplied power adapter. | | Data Interface | Ethernet RJ‑45, USB‑C, or HDMI (depends on model) | Follow the diagram in the spec sheet | For networked operation, configure a static IP or DHCP. | | Optional Sensors | 4‑pin Molex or RJ‑45 | Consult the wiring diagram for each sensor | Ensure proper termination to prevent reflections on high‑speed lines. |
We do not host pirated PDFs. Instead, we provide the fastest legal methods to obtain the document. As of 2025, here are the three best sources:
While you are downloading the full PDF, use this cheat sheet to solve the most common issues. Bookmark this section.