Zclever Security Camera Manual May 2026

Need help with your Zclever Security Camera ? Based on common support queries for Zclever systems (including model D2104N), here are the essential manual, setup, and password troubleshooting steps. 🔑 Default Password Help (D2104N DVR)

If you are locked out or need to log in for the first time, try these credentials: 6036huanyuan JustAnswer

Note: If these do not work, the password may have been changed during the initial setup. 🛠️ Factory Reset (Lost Password)

If the default password doesn't work, perform a factory reset: Locate Reset Button:

Look for a small pinhole reset button on the camera or DVR unit. Hold Reset: zclever security camera manual

Press and hold the button for 10-15 seconds while the device is powered on. Default Restore:

The system will revert to default settings (and erase personal data), allowing you to log in with factory credentials or set a new password. JustAnswer 📡 Basic Setup & Troubleshooting App Usage:

Check the app manual (often accessible via QR code on the box) to connect to Wi-Fi. Power Supply:

Ensure the DC adapter is properly connected to a working outlet. Connection Issue: Need help with your Zclever Security Camera

If the camera isn't connecting to Wi-Fi, try restarting both the camera and your Wi-Fi router.

For more complex issues, referencing the specific D2104N DVR model's user guide or contacting support is recommended. JustAnswer Zclever Security Camera Manual & DVR Setup Help

Zclever security camera systems utilize P2P infrastructure requiring third-party apps like XMEye or YCC365, with default login credentials often set to username 'admin' and a blank password. Setup involves connecting to a 2.4 GHz network and scanning the device's QR code, while factory resets can be performed via a pinhole button or a 10-time directional pad press on DVR models. For troubleshooting and setup instructions, refer to guidance found on JustAnswer. Zclever Security Camera Manual & DVR Setup Help

Here’s a short article-style manual for the ZClever security camera (assumes a generic consumer IP/wireless camera model). If you need a model-specific manual, tell me the exact model number. Sensitivity: Set to Medium (3/5)

Part 4: Configuring Motion Detection & Alerts

The most common reason to buy a Zclever camera is motion alerts. Here is how to set them up correctly to avoid false alarms (caused by shadows, bugs, or car headlights).

Path: Open Camera Live View -> Click Settings (Gear icon) -> Motion Detection or Alert Settings.

Recommended Settings:

  • Sensitivity: Set to Medium (3/5). High will catch every leaf moving; Low will miss a person walking slowly.
  • Detection Interval: Set to 10 seconds. This prevents the camera from sending 100 alerts in 1 minute. It will alert you, then wait 10 seconds before alerting again.
  • Activity Zone: (If available) Drag the grid to block out streets, trees, or neighbors' windows. Only the white (active) squares will trigger alerts.
  • Push Notification: Toggle ON.

Testing motion: Walk in front of the camera. Within 5 seconds, your phone should receive an alert. If not, check your phone's "Do Not Disturb" settings and ensure the app has permission for notifications (Phone Settings -> Apps -> Zsmart -> Notifications -> Allow).

D. Alert Frequency

  • Set intervals (e.g., every 3 minutes) to prevent notification spam.

Example RTSP URL formats

  • rtsp://admin:password@192.168.1.100:554/h264/ch1/main
  • rtsp://user:pass@camera.local:554/stream1

1. Package Contents

  • Zclever ZC-360 Pro Camera Unit (1x)
  • Power Adapter (5V/2A) & USB Cable (3m) (1x)
  • Mounting Bracket & Screw Kit (1x)
  • Quick Start Guide (1x)
  • Warranty Card (1x)
  • Waterproof Seal Kit (for outdoor use) (1x)

8. Advanced Settings: Motion Detection, Alerts, and Recording

To optimize your Zclever camera, go to Settings (⚙️) → Detection & Alerts.