Zd10-100 Datasheet Updated May 2026

Zd10-100 Datasheet Updated May 2026

The ZD10-100 is a flexible, thin-film force-sensing resistor (FSR) designed for low-to-medium pressure detection. It is widely used in applications requiring tactile feedback, such as smart shelves, medical monitoring, and robotics. Key Technical Specifications

The sensor operates by decreasing its electrical resistance as more force is applied to its sensing area. Specification Pressure Range Thickness ≤0.25mm – 0.3mm Dimensions ~100mm (Length) x 10mm (Width) Response Point ≤20g – 50g (activation threshold) Response Time <1ms – 10ms Test Voltage Typical DC 3.3V (supports up to 5V) Durability >1 million cycles Operating Temp -20°C to 60°C Features & Applications

Design: Ultra-thin and flexible, allowing it to conform to curved surfaces like robotic fingers or wearable gear.

Dual-Functionality: Often marketed as having both pressure-sensing and bend-sensing capabilities, though primarily used for force. Typical Uses:

Medical: Bed occupancy monitoring and intelligent breathing belts.

Smart Tech: Pressure-sensitive touch panels and smart shelf inventory tracking.

Robotics: Obstacle detection "whiskers" and grip force sensing for robotic hands. Integration Notes

The sensor typically features a 2.54mm pin pitch for easy connection to microcontrollers like Arduino or ESP32. Because it is a resistive sensor, it is commonly used in a voltage divider circuit where the varying resistance is converted into a measurable analog voltage.

Retailers such as Amazon and specialty electronics sites like Flexniss provide additional technical diagrams and purchasing options. ZD10-100 New upgrade4.0 - SENSOR+TEST zd10-100 datasheet

Flexible Thin Film Pressure Sensor. ZD10-100. Project. Size parameter. Product size. Thickness. Range. Response point. Durability. SENSOR+TEST Flexible Thin Film Pressure Sensor ZD10-100 - Flexniss

Symptom: Diode is cracked or shorted.

Cause: Overcurrent or overvoltage. The 100mW limit was exceeded. Replace and recalculate the series resistor for 5mA nominal current.

1. Overview & General Impression

The ZD10-100 is a 10-watt isolated DC-DC converter module. The datasheet presents a robust solution for distributed power architectures and industrial control applications. The documentation is generally well-structured, providing clear graphs for derating, efficiency, and ripple noise.

  • Target Audience: Industrial automation, telecom equipment, and test and measurement designers.
  • Form Factor: The device uses an industry-standard package (often DIP-24 style), making it easy to design into existing footprints without extensive PCB re-layout.

SOD-323 Package (Surface Mount)

  • Body Length: 2.5 mm ± 0.1 mm
  • Body Width: 1.25 mm ± 0.1 mm
  • Height: 0.95 mm max
  • Pin 1: Cathode (marked with a band or line)
  • Pin 2: Anode

Thermal Characteristics

Understanding thermal limits is crucial for PCB design. The ZD10-100 datasheet highlights:

  • Junction-to-Ambient Thermal Resistance (RθJA): Approximately 500 °C/W for SOD-323 on a standard FR4 board.
  • Derating Factor: Above 25°C, the power dissipation must be derated by 0.8 mW/°C.

Real-world implication: At 100°C ambient temperature, the maximum allowable power dissipation drops to: 100mW - (100-25)*0.8mW = 100mW - 60mW = 40mW

Conclusion

Without specific details on the "zd10-100," it's challenging to provide a direct review. However, understanding what to look for in a datasheet and how to evaluate it is crucial for selecting the right components for electronic designs. Always cross-reference the information with the manufacturer's specifications and consider contacting the manufacturer or a distributor for more detailed information or samples if you're considering using the zd10-100 in a project.

is a flexible, ultra-thin film pressure sensor designed for high-sensitivity force detection in space-constrained applications. It operates on a resistance-based principle where the sensor's resistance decreases as external pressure is applied. SENSOR+TEST Key Technical Specifications Based on its official technical datasheet , here are the core operating parameters: Pressure Range: 0 to 500g. Response Point: is less than or equal to 20g (threshold to trigger a resistance change). Thickness: is less than or equal to 0.25 mm (ultra-thin profile). Dimensions: Approximately 100 mm in length and 10 mm in width. Extremely fast with a response time of is less than 1 ms and recovery time of is less than 15 Durability: Rated for over 1 million trigger cycles. Operating Temperature: Effective from -20°C to 60°C. Core Features & Applications Flexible Thin Film Pressure Sensor ZD10-100 - Flexniss

ZD10-100 Flexible Thin Film Pressure Sensor Technical Report The Go to product viewer dialog for this item. The ZD10-100 is a flexible, thin-film force-sensing resistor

is a highly sensitive, ultra-thin, flexible pressure sensor designed for a wide variety of static and dynamic pressure sensing applications. It functions as a variable resistor whose resistance decreases as the applied pressure increases. 1. Technical Specifications Key performance indicators for the

include its physical dimensions and electrical response characteristics: Value/Specification Sensing Range 0 – 500g (standard range) Thickness ≤is less than or equal to 0.3 mm (typically < 0.25 mm) Response Point ≤is less than or equal to 50g (some variants reported at < 20g) Dimensions Length: 104.7 mm; Width: 10 mm Sensing Area 85 mm x 10 mm Response Time Recovery/Resume Time Durability > 1 million cycles Operating Temp -20°C to 60°C 2. Key Features

High Sensitivity: Utilizes advanced nanometer materials to detect minor changes in force.

Durability and Flexibility: Designed for long-term use (over 1 million cycles) and is highly resistant to bending, making it suitable for curved surfaces.

Dual Functionality: Acts as both a waterproof and pressure-sensitive component.

Electrical Stability: Not sensitive to ESD (Electrostatic Discharge) and produces no EMI (Electromagnetic Interference) during operation. 3. Operating Principle The

is a resistance-type sensor. Under a "no-load" condition, its initial resistance is typically greater than 10M Ωcap omega

. When pressure is applied to the sensing area, the resistance decreases. This change can be converted into a readable electrical signal (voltage) using a simple voltage divider circuit, often tested at a typical value of DC 3.3V. 4. Applications SOD-323 Package (Surface Mount)

The sensor's thin profile and flexibility allow it to be integrated into several smart technology fields:

Smart Home & Electronics: Intelligent breathing belts, smart shelves, and automated home systems.

Medical & Health Monitoring: Out-of-bed monitoring for patients and healthcare sensors.

Industrial Use: Pressure distribution testing and precise force measurement in compact environments. 5. Implementation Notes

Manufacturers like Flexniss and suppliers on platforms like Amazon recommend using program algorithms to calibrate the sensor to account for minor batch variations in consistency ($\pm$15%).

I cannot directly provide a full PDF or copyrighted datasheet for the ZD10-100 (likely a voltage regulator, Zener diode, or industrial power supply module).

However, I can give you useful, searchable text and key parameters to help you locate the official datasheet or verify the part.

4. EMI and Safety Features

  • EMI Filtering:
    • The datasheet notes that the unit meets EN55032 Class A standards.
    • Review: It is important to note that achieving Class A usually requires external filtering components (capacitors/inductors) detailed in the application notes section of the datasheet. The module alone rarely passes Class B without a significant external filter, which adds BOM cost.
  • Protections:
    • Includes Over Current Protection (OCP), Over Voltage Protection (OVP), and Remote On/Off.
    • Review: The Remote On/Off logic is flexible (often positive or negative logic compatible), which is a pro for system integration. The OCP usually employs "Hiccup" mode (auto-restart), which is preferred over latching shutdowns for unattended industrial equipment.