Ortung

20 | Zebex Z6170 Driver

The Zebex Z-6170 is an omnidirectional hands-free barcode scanner known for its 20-line laser pattern and high-speed decoding (up to 1,400 scans per second). Setting it up typically requires specific drivers or utility software depending on your interface (USB, RS-232, or Keyboard Wedge). Driver & Software Downloads

To get your scanner running, you can find the necessary files on the ZEBEX Support & Download page or the specific Z-6170 Product Page.

EzSet 1D Utility: A primary program for setting up and testing Zebex scanners. It supports Windows XP through Windows 10.

Update Tool: Used for firmware updates via RS-232 or USB connections.

OPOS Driver: Required if you are integrating the scanner into a Point of Sale (POS) system that uses the OPOS standard. Installation & Configuration Steps

Hardware Connection: Plug the scanner into your computer using the appropriate cable (USB, RS-232, or PS/2).

Interface Selection: The scanner must be told which interface it is using by scanning specific configuration barcodes from the Z-6170 Quick Guide.

USB Default: Scan the "Return to USB default" barcode for standard USB HID (keyboard emulation).

RS-232: Scan "Return to RS-232 default" if using a serial port.

Virtual COM (Optional): If you need the USB connection to act like a COM port, you may need to install a "Virtual COM" driver, often found in the Zebex Port Devices section or provided with the EzSet utility.

Verification: Present a standard barcode to the scanner. A successful read is indicated by a short beep and a green LED light. Troubleshooting Common Issues

Scanner reads only one barcode then stops: This often happens if the scanner is in "Keyboard Wedge" mode but not properly connected to a host terminal.

Incorrect Characters: If the output is garbled on older systems or different OSs (like Linux/Mac), use the FAQ Setting Codes to adjust USB speeds (USB0 for older Windows, USB2 for Mac/Linux). Z-6170 | Leading 2D Barcode Scanners Solution Provider Zebex Z6170 Driver 20

Most academic papers wouldn't focus on a device driver itself. Instead, they might cite the Zebex Z6170 as a tool in broader research areas like:

If you need the driver for practical use (not research), you should check:

If you are looking for academic citations where the Z6170 was used in experiments, try searching:

Could you clarify: Are you looking for a research paper that uses the Z6170 scanner, or for technical documentation about its driver version 20?

The Zebex Z-6170 is an elegant, high-performance omnidirectional laser scanner designed to handle the heavy demands of retail and point-of-sale (POS) environments. While the hardware itself is "plug-and-play" for standard keyboard emulation, obtaining specific drivers—often referred to in technical circles as "Driver 2.0" or similar versioning—is essential for advanced configuration and OPOS/JPOS integration. Overview of the Zebex Z-6170

The Z-6170 stands out for its unique "single-laser" technology that creates a 20-line omnidirectional scan pattern. This allows for high-speed scanning from any angle, reducing wait times at checkout. Its heavy-duty suction cup base and adjustable tilt make it a staple in pharmacies, boutique shops, and convenience stores. Why You Need the Drivers

Most users connect the Z-6170 via USB or RS-232. While basic barcode scanning works immediately, the Zebex Driver 2.0 (or latest USB-to-Serial drivers) is required for:

Virtual COM Port Emulation: Necessary for POS software that doesn't support "keyboard wedge" input.

OPOS/JPOS Support: Essential for standardized communication between the scanner and specialized retail management software.

Custom Configuration: Adjusting scan speeds, enabling/disabling specific barcode symbologies, and updating firmware. Installation & Configuration Steps

Hardware Connection: Plug the scanner into a USB port. If you are using an RS-232 connection, ensure the external power supply is connected.

Driver Download: Visit the official Zebex Download Center to find the most recent USB Virtual COM driver. The Zebex Z-6170 is an omnidirectional hands-free barcode

Virtual COM Setup: After installing the driver, the scanner will appear as a "COM Port" in your Windows Device Manager. This allows your POS software to "talk" to the scanner directly.

Programming Barcodes: Use the Zebex "ScanQuest" or the manual's programming barcodes to set the scanner to "USB Virtual COM" mode if it doesn't auto-detect. Technical Specifications at a Glance Scan Pattern: 5 directions of scan field, 20 lines total. Scan Rate: 1,400 scans per second (omnidirectional). Light Source: 650 nm visible laser diode.

Durability: Designed to withstand 1-meter drops to concrete.

What is the Zebex Z6170?

Before discussing the driver, let’s briefly examine the hardware. The Zebex Z-6170 is a high-performance CCD barcode scanner. Unlike laser scanners, CCD scanners use an array of tiny light sensors to capture an image of the barcode. This allows the Z-6170 to read barcodes from a closer distance (contact to 50mm) without the moving parts that wear out in laser scanners.

Key features of the Z-6170 include:

8. Recommendation

If your deployment uses Windows 10/11 and requires serial communication over USB, the Zebex Z6170 Driver 20 is a stable, well-tested choice. For new projects, consider using the scanner in USB HID Keyboard mode (driverless) unless your software specifically demands a COM port. Always download from trusted sources and compare the file’s digital signature with Zebex’s public certificate.

Zebex Z-6170 is an omnidirectional laser scanner known for its 20 laser lines and high-speed decoding (up to 1,400 scans per second). Setting it up typically requires the USB CDC (Virtual COM) Driver

or specific configuration barcodes found in the official manuals 1. Essential Driver & Utility Downloads

Most modern operating systems (Windows 7/8/10) will auto-detect the Z-6170 as a generic HID Keyboard. However, specialized applications may require specific drivers available from the Zebex Support Center USB CDC Driver (x64) : Required for Virtual COM port emulation. EzSet 1D Utility

: A program for configuring and testing the scanner (Note: RS-232 cable is required for setup; USB is for firmware updates only). Update Tool : Used for firmware upgrades via RS-232 or USB. OPOS Driver

: Required for integration with POS (Point of Sale) software. 2. Hardware Connection Steps

: Ensure your host computer is switched off before connecting. Plug Scanner If you need the driver for practical use

: Insert the modular end of the interface cable into the scanner port until it "clicks".

: Connect the other end of the cable (USB or RS-232) to your computer.

: Switch on the computer. The scanner should emit a "Do Re Mi" melody. 3. Configuration & Programming

To change settings (like switching between HID and Virtual COM), you must use the Z-6170 Quick Guide User Manual

Z-6170 - ZEBEX | Leading 2D Barcode Scanners Solution Provider

Zebex Z6170 Driver 20: A Comprehensive Overview

The Zebex Z6170 Driver 20 is a high-performance, 2D barcode scanner driver designed for seamless integration with various operating systems, including Windows. This write-up provides an in-depth look at the features, functionality, and technical specifications of the Zebex Z6170 Driver 20.

Key Features:

  1. High-Speed Scanning: The Zebex Z6170 Driver 20 supports rapid scanning capabilities, allowing users to quickly and accurately capture 2D barcode data.
  2. Multi-Platform Compatibility: This driver is compatible with various operating systems, including Windows 10, Windows 8, Windows 7, and Windows XP.
  3. Easy Integration: The Zebex Z6170 Driver 20 provides a straightforward integration process, enabling developers to easily incorporate the scanner's functionality into their applications.
  4. Advanced Data Decoding: The driver features advanced data decoding capabilities, supporting a wide range of 2D barcode symbologies, including QR Code, Data Matrix, and PDF417.

Technical Specifications:

  1. Scanner Type: 2D Barcode Scanner
  2. Scan Rate: Up to 120 scans per second
  3. Barcode Symbologies: Supports a wide range of 2D barcode symbologies, including:
    • QR Code
    • Data Matrix
    • PDF417
    • Aztec
    • Maxi Code
  4. Interface: USB, RS-232, and Keyboard Wedge
  5. Operating System Compatibility: Windows 10, Windows 8, Windows 7, Windows XP, and more

Benefits:

  1. Improved Productivity: The Zebex Z6170 Driver 20 enables fast and accurate barcode scanning, increasing productivity and reducing errors.
  2. Streamlined Integration: The driver's ease of integration and compatibility with various operating systems simplify the development process, reducing development time and costs.
  3. Enhanced Data Accuracy: The advanced data decoding capabilities of the Zebex Z6170 Driver 20 ensure accurate data capture, minimizing errors and improving overall data quality.

Conclusion:

The Zebex Z6170 Driver 20 is a reliable and high-performance solution for integrating 2D barcode scanning capabilities into various applications. With its advanced features, technical specifications, and compatibility with multiple operating systems, this driver is an ideal choice for developers and organizations seeking to improve productivity, accuracy, and efficiency in their barcode scanning operations.

3. If you require "USB Serial" (COM Port) mode

If your specific business software requires the scanner to be recognized as a COM Port rather than a keyboard, you may need the USB VCP (Virtual COM Port) Driver.

Q: Is there a Driver 20 for macOS?

A: No. Zebex never released an official macOS driver. Mac users must use the scanner in USB HID (keyboard) mode, which works natively.

Prerequisites

Step 2: Run the Installer

  1. Right-click the Zebex Z6170 Driver 20 setup file and select Run as Administrator.
  2. Accept the license agreement. The installer will place necessary .inf and .sys files into C:\Windows\System32\drivers.
  3. Wait for the completion screen. Do not plug in the scanner yet.

4. Installation Overview (when using USB virtual COM mode)

keyboard_arrow_up