Zte Zxv10 B760hs3 Specs May 2026

Here is the detailed specifications report for the ZTE ZXV10 B760HS3, an IPTV (Internet Protocol Television) set-top box commonly provided by telecom operators (such as Telenor, Digi, or other regional ISPs).

---

Benchmark Context (Approximate)

• Antutu (v7/8): ~30,000 – 35,000 points
• Geekbench 5 (Single/Multi): ~120 / ~420

This performance tier places the B760HS3 between a basic streaming stick and a high-end NVIDIA Shield. It is optimized for smooth 4K video decoding, not computational heavy-lifting.

10. Troubleshooting and Modification (Advanced Users)

For enthusiasts, the ZTE B760HS3 has a modest modding community (primarily on Russian and Chinese forums like 4PDA). Possible actions include:

• Unlocking the bootloader (specific to firmware version).
• Installing a custom recovery (like TWRP if ported).
• Flashing a "clean" Android TV 9.0 / 10 ROM (risk of losing operator features).
• Rooting (using Magisk via patched boot image).

Warning: Modifying your box may violate your ISP’s terms of service and permanently brick the device. Proceed only if you have a serial-to-USB adapter and experience with unbricking Amlogic devices (using USB Burning Tool).

Publication: Technical Analysis — ZTE ZXV10 B760HS3

Executive summary

• Device class: ZTE ZXV10 B760HS3 — A midrange CPE / set‑top‑box family member often deployed by ISPs for IPTV and ADSL/VDSL subscriber premises. Marketed variants appear under operator brand names (e.g., PTCL).
• Positioning: Designed for ISP-managed residential broadband + IPTV; emphasis on network/video delivery, TR‑069 management, basic Wi‑Fi/LAN and voice interfaces. Not a high‑end consumer router.

Key specifications (aggregated from vendor/operator docs and device manuals)

• WAN access: ADSL/ADSL2/ADSL2+ (RJ‑11) or operator‑specific fiber/EPON/DSL variants in the ZXV10 family; some market SKUs include Ethernet WAN.
• LAN: 4 × 10/100 Mbps RJ‑45 LAN ports (typical for B760-series). NAT, DHCP server, VLAN support for IPTV.
• Wi‑Fi: 802.11 b/g/n (2.4 GHz) on common B760 variants; some ZXV10 family devices include dual‑band or newer chipsets in other SKUs — assume single‑band 2.4 GHz for B760HS3 unless operator notes otherwise.
• Voice: POTS (RJ‑11) in voice‑enabled SKUs; SIP/VoIP support depends on operator firmware.
• IPTV/Video: Set‑top functionality (video decode + HDMI) or integration with operator middleware; multicast/IGMP snooping and IGMP proxy support.
• Management & protocols: TR‑069 remote management, Web GUI, CLI, SNMP (operator firmware dependent). QoS, VLAN tagging for VoIP/IPTV, NAT/ALG, port forwarding.
• Security: SPI firewall, URL/IP filtering, WPA/WPA2 (WPS availability varies by firmware).
• Hardware (typical family class): Embedded MIPS/Lantiq‑class SoC; 32–128 MB RAM (many legacy models 32–64 MB), 8–16 MB flash typical for older firmware images. Single CPU core at modest MHz (e.g., ~250–400 MHz) on many ZXV10 home gateways.
• Physical / power: Compact plastic enclosure, external DC adapter (12V or 9V depending on SKU), indicator LEDs, reset button.

Functional analysis

• Strengths

  • ISP integration: TR‑069 and VLAN/QoS make it easy for ISPs to deliver managed broadband, IPTV and voice.
  • Cost and availability: Low BOM cost and multiple operator SKUs make it widely used in emerging markets.
  • Basic feature set: Sufficient for standard residential use (web, streaming, VoIP) when paired with operator back‑end.

• Weaknesses / limitations

  • Hardware constraints: Limited CPU, RAM and flash restrict concurrent throughput, number of NAT sessions, and advanced features (VPN termination, many simultaneous clients).
  • Wi‑Fi limitations: Single‑band 2.4 GHz only on many B760 SKUs—congested spectrum, lower peak throughput and range limitations compared with modern dual‑band/ax devices.
  • Firmware lock: Operator‑customized firmware may restrict user access, limit updates, and delay security patches.
  • Security posture: Historically, some ZTE CPEs have had high‑severity CVEs; timely patching depends on operator policies.

Performance characteristics and real‑world expectations

• Routing throughput: Expect modest NAT throughput (tens of Mbps to low hundreds) depending on firmware optimizations and hardware revision; not suitable for multi‑hundred‑Mbps broadband without performance impact.
• Wi‑Fi throughput: Single‑stream 802.11n 2.4 GHz practical TCP throughput ~40–80 Mbps in ideal conditions; real-world lower in noisy environments.
• IPTV: Designed to handle multicast TV streams reliably when VLAN/IGMP config is correct; dedicated hardware/video pipeline on STB SKUs improves playback reliability.
• Concurrent users: Good for small households (3–6 active devices); performance degrades with many simultaneous high‑bandwidth flows or heavy NAT use.

Manageability, upgradeability and third‑party firmware

• ISP management: Full remote config via TR‑069; automatic provisioning common.
• User firmware: Many operator devices have locked bootloaders and signed firmware. Community projects have partially supported similar ZXV10 models (OpenWrt/LEDE support exists for select ZXV10 models), but B760HS3 availability for mainline third‑party images is limited and risky — flashing may brick units and void ISP support.

Security considerations

• Attack surface: Web GUI, TR‑069, UPnP and remote management channels are primary exposure vectors. Older default passwords and unpatched firmware increase risk.
• Mitigations: Disable remote WAN GUI, change default admin and Wi‑Fi passwords, disable WPS if present, enable WPA2, restrict TR‑069 to operator endpoints, monitor for vendor firmware updates and apply through ISP when available.

Deployment recommendations (for home users and ISPs)

• For home users:

  • Use the device only if provided/required by ISP; supplement with a modern personal router or mesh Wi‑Fi (set ZTE to bridge/AP mode if possible).
  • Change default credentials, disable remote admin access, and use strong WPA2/WPA3 (if supported).
  • Offload heavy services (VPN termination, NAS, gaming servers) to a dedicated device.

• For ISPs / integrators:

  • Ensure operator firmware is regularly updated and signed; limit unnecessary services exposed to WAN.
  • Use VLAN/QoS templates for IPTV/VoIP separation; monitor NAT session counts and upgrade hardware where subscriber speeds exceed device capabilities.
  • Provide clear end‑user guidance for security (password changes, firmware updates).

Comparative note

• Versus modern consumer routers: ZXV10 B760HS3 (and similar B760 family SKUs) trade advanced wireless performance, multi‑GHz capability, and CPU headroom for low cost and operator manageability. For pure ISP‑managed IPTV/ADSL use cases it remains adequate; for high‑speed broadband and dense Wi‑Fi environments modern dual‑band Wi‑Fi 5/6 routers outperform it significantly.

Conclusion

• The ZTE ZXV10 B760HS3 is a pragmatic ISP CPE: economical, manageable and fit for legacy DSL/IPTV deployments but limited by modest hardware and often locked firmware. Where throughput, modern Wi‑Fi, or advanced user control matter, pair or replace it with a dedicated consumer router or request an upgraded gateway from the ISP.

References and source types

• Vendor/ISP user manuals and datasheets (ZXV10 B760H family manuals)
• Device catalog and community resources (DeviceAtlas, device.report, ManualsLib)
• OpenWrt/community notes for related ZXV10 models (context on hardware variants and third‑party firmware support)

If you want, I can:

• Produce a one‑page printable spec sheet,
• Create an ISP deployment checklist,
• Or draft step‑by‑step instructions to convert the device to bridge/AP mode (assuming your firmware allows it).

The ZTE ZXV10 B760HS3 is an Android-based set-top box frequently used by service providers like PTCL for smart TV services. It is designed to deliver high-definition digital media and interactive services.  Core Hardware Specifications 

Architecture: Supports both 32-bit and 64-bit hardware and operating system architectures.

Operating System: Typically runs a customized version of Android TV.

Expandable Storage: Features a dedicated slot for an insertable memory card (TF/microSD) to increase local storage.  Connectivity and Interfaces 

The device includes various ports on its rear and side panels to facilitate multimedia connections:  Rear Panel 

HDMI: Standard output for high-definition video and audio to a TV.

WAN (Ethernet): 10/100M Base-T RJ45 interface for a wired internet connection.

SPDIF: Optical digital audio output for high-quality sound systems.

AV Output: Composite video output for older television sets. Power: DC+12V input socket and a physical power switch.  Side Panel 

USB Port: Interface for connecting external drives or peripherals. TF Card Slot: For expandable storage via microSD cards.  Key Features 

Network Capabilities: Supports both wired Ethernet and wireless networking.

Multimedia Support: Compatible with major streaming platforms like YouTube, Netflix, and Prime Video.

System Updates: The device automatically checks for firmware updates upon powering on, a process that typically takes 3 to 5 minutes.

Customization: Many users utilize custom firmware (flashing) to unlock additional features or add the Google Play Store to devices provided by ISPs.  Zte Zxv10 B760hs3 Specs

The ZTE ZXV10 B760HS3 is an Android-based set-top box (STB) widely used by telecommunications providers like PTCL to deliver IPTV and OTT (Over-the-Top) video services. This compact device is designed to transform standard televisions into smart hubs, supporting various streaming applications and digital media playback. Core Technical Specifications

The ZTE ZXV10 B760HS3 is engineered for efficient 1080P video up-conversion and smooth media streaming.

Processor: Quad-core ARM processor designed for multimedia processing.

Memory (RAM): 1GB DDR RAM, which handles standard streaming tasks and basic app navigation.

Storage (ROM): 4GB of internal flash storage for system firmware and essential applications.

Operating System: Powered by Android, allowing users to access a familiar interface and various pre-installed or sideloaded apps. Hardware Connectivity & Ports

The device features a versatile array of ports for connecting to displays, internet, and external storage: Video & Audio Output:

HDMI Out: Primary port for high-definition video and audio transmission to modern TVs.

AV Out: For compatibility with older television models using RCA cables.

Digital Audio (SPDIF): Allows connection to external soundbars or home theater systems for enhanced audio. Data & Storage:

USB Ports: Includes 2 USB ports on the side for connecting peripherals like a mouse, keyboard, or external hard drives.

Micro SD Slot: Enables storage expansion for media files or apps. Network:

Ethernet (LAN): 1 RJ45 port for a stable, wired internet connection.

Internal Wi-Fi: Supports wireless connectivity to home networks. Key Features and Software Interface

The B760HS3 provides a user-friendly ecosystem for home entertainment:

Pre-installed Apps: Often includes Smart YouTube, standard YouTube, Google Play Store, and Google Chrome. Here is the detailed specifications report for the

Media Playback: Features a "Home Media" center for viewing content directly from USB drives.

Screen Mirroring: Supports Miracast for casting content from smartphones or tablets to the TV.

Customization: The box is a popular choice for hobbyists to flash custom firmware to "unlock" its full Android potential, enabling the installation of third-party apps like TikTok or IPTV Pro players. Design and Physical Attributes Form Factor: Compact, square-shaped "RichMedia Box".

Controls: Typically includes a dedicated On/Off switch on the rear.

Remote Compatibility: Works with standard infrared remotes; some models also support using a smartphone as a secondary remote for screen jilting.

Understanding the ZTE ZXV10 B760HS3: Comprehensive Specifications and Features

The ZTE ZXV10 B760HS3 is a high-performance Android-based set-top box (STB) widely utilized by service providers, most notably as part of the PTCL Smart TV service in Pakistan. Designed to bridge the gap between traditional television and modern streaming, this device transforms standard displays into smart entertainment hubs capable of running a variety of Android applications. Core Technical Specifications

While the B760HS3 is a specific iteration of the B760 series, it shares a robust hardware foundation designed for smooth media playback and multitasking.

Operating System: Typically runs on a modified version of Android, often seen with custom firmware versions that support standard Android apps.

Architecture: Supports both 32-bit and 64-bit architectures, ensuring compatibility with a wide range of legacy and modern applications. Storage & Memory:

RAM: Generally equipped with enough memory to handle HD streaming and basic app navigation.

Internal Storage: Built-in flash storage for system files and apps.

Expandable Storage: Features a TF (microSD) card slot on the side panel, allowing users to increase storage for offline media and additional apps.

Processing Power: Leverages a multi-core processor capable of decoding various streaming protocols, including H.264 and MPEG-DASH. Connectivity and Port Layout

The physical design of the B760HS3 is centered around versatility, offering numerous input and output options to fit various home theater setups.

---