Nitocote — Pe135 Msds

Fosroc’s Nitocote PE135 is a single-component, grey-colored viscous liquid coating based on hydrophobic polyester resin. It is designed to provide high-performance chemical and abrasion resistance for concrete surfaces, particularly in underground applications and foundations Product Overview Eco-Friendly Composition

: Unlike many industrial coatings, Nitocote PE135 is free from hazardous materials such as coal tar pitch, hydrocarbon-based solvents, and aromatic amines. Dual Functionality

: It acts as both a protective coating and a curing compound in a single application, which helps save on labor and construction time. Versatile Application

: It can be applied to "green" concrete as young as 24 hours old. Technical Specifications Curing Time

: Surface drying is rapid, taking approximately 35–40 minutes at 20°C and as little as 4–6 minutes at 45°C. Resistance

: Exhibits excellent resistance to chloride and sulfate ions, as well as general chemical and UV exposure. Physical Properties

: Features a specific gravity of 1.28 g/cm³ and a solids content by weight of 53%. Safety and Handling (MSDS Summary) Nitocote PE135 Safety Data Sheet (SDS) provides critical instructions for safe handling: Health Hazards

: The product is corrosive to the skin and can cause serious eye damage. Inhalation of high concentrations may irritate or damage the respiratory system, and it is toxic if swallowed. Protective Measures

: Always wear protective gloves, clothing, and eye/face protection (P280).

: If skin contact occurs, wash immediately with plenty of water (P302+P352). If eye contact occurs, rinse cautiously with water for several minutes and remove contact lenses if present. Storage and Disposal

: Store in a locked area (P405) and dispose of contents/containers in accordance with national regulations (P501).

For full technical documentation, you can refer to the official Fosroc Product Page or download the detailed Safety Data Sheet via Scribd. or a comparison with other Nitocote variants like the PU Aliphatic version? Nitocote PE135 - Fosroc

Nitocote PE135 is a single-component, high-performance protective coating based on a hydrophobic polyester resin. It is specifically engineered to provide chemical and abrasion resistance for concrete substrates, often serving a dual purpose as both a protective membrane and a curing compound. Critical Safety Information (MSDS Summary)

The Safety Data Sheet (SDS) for Nitocote PE135 outlines important health hazards and handling requirements: Potential Health Effects: Eye Contact: May cause irritation or serious eye damage.

Skin Contact: Can cause irritation, sensitization, or allergic reactions in sensitive individuals. Ingestion: May cause discomfort or toxicity if swallowed.

Inhalation: Prolonged inhalation of high concentrations may damage or irritate the respiratory system. nitocote pe135 msds

Key Ingredients: Contains talc and silica flour. It is notably free from coal tar pitch, hydrocarbon-based solvents, and aromatic amines.

Eco-Toxicity: Generally not regarded as dangerous for the environment, though some components may be harmful to aquatic organisms in concentrated forms. Technical Specifications & Performance

Detailed performance data is typically found in the Fosroc Technical Datasheet. Value/Standard Density Solids Content Surface Drying Time 35–40 min @ 20∘C20 raised to the composed with power C ; 10–15 min @ 35∘C35 raised to the composed with power C Complete Cure 25∘C25 raised to the composed with power C Water Absorption (BS 1881 Pt. 122) Adhesion Strength (ASTM D4541) UV Resistance Stable; no undue change (ASTM D4459) Applications & Usage Nitocote PE135 Safety Data Sheet | PDF | Toxicity - Scribd

Nitocote PE135 is an eco-friendly, single-component protective coating and curing compound based on hydrophobic polyester resin. It is designed to provide corrosion, chemical, and abrasion resistance for concrete substrates.  Safety & First Aid (MSDS Summary) 

The product is water-based and non-toxic, free from hazardous materials like coal tar pitch or aromatic amines.  Inhalation: Move to fresh air; may cause minor irritation.

Skin Contact: Wash thoroughly with soap and water; may cause irritation. Eye Contact: Rinse immediately with plenty of water. Ingestion: Rinse mouth with water.

Fire: Not flammable; use extinguishing media suitable for surrounding fires.

Spillage: Soak up with water and wash down immediately while still damp.  Technical Specifications  Property  Specific Gravity Solids Content (Weight) Complete Cure 7 days @ 25°C Adhesion Strength 1.5 N/mm² UV Resistance Stable; no undue change in color Application Guidelines  Nitocote PE135 Data Sheet | PDF - Scribd

Product: Nitocote PE135 Type: Coating material, likely a type of elastomeric or polymer-based coating.

Review:

Nitocote PE135 is a specialized coating material designed for various industrial applications. When examining the Material Safety Data Sheet (MSDS) for Nitocote PE135, several key points emerge that are crucial for users to be aware of:

1. Composition: The exact composition of Nitocote PE135 might not be fully disclosed due to proprietary reasons, but it's known to contain polymers and possibly solvents. The specific chemical formulation can vary, which might affect its performance and safety handling.

2. Hazards Identification: According to typical MSDS for similar products, Nitocote PE135 may pose several health and safety risks. These can include:

   • Skin and Eye Irritation: Prolonged exposure to the product can cause skin irritation, and contact with eyes may lead to irritation or more severe eye damage.
   • Respiratory Issues: Inhalation of fumes, especially in confined spaces, can lead to respiratory problems. It's essential to ensure good ventilation when working with this product.
   • Flammability: Depending on its composition, Nitocote PE135 might be flammable, posing a fire hazard if not handled properly.

3. First Aid Measures: In case of exposure:

   • Wash the affected skin area thoroughly with soap and water.
   • For eye exposure, flush eyes with water for several minutes.
   • If inhaled, move the person to fresh air and seek medical attention if symptoms persist.

4. Firefighting Measures: In case of a fire, appropriate extinguishing media should be used. Water spray, foam, dry chemical, or carbon dioxide can be effective, depending on the composition of the product. Composition: The exact composition of Nitocote PE135 might

5. Accidental Release Measures: Contain and collect spillage using absorbent materials. Dispose of the waste according to local regulations.

6. Handling and Storage: Handle in well-ventilated areas. Store in a cool, dry place, away from incompatible materials.

7. Exposure Controls/Personal Protection: Use protective gloves, safety glasses, and a respirator if necessary. The type of personal protective equipment (PPE) needed can depend on the specific conditions of use and the concentration of the product.

8. Physical and Chemical Properties: The product likely has specific gravity close to 1, and it might be slightly viscous. The boiling point and melting point can vary based on the solvent and polymer used.

9. Stability and Reactivity: Generally stable under recommended storage conditions. Avoid high temperatures and incompatible materials.

Conclusion:

The Nitocote PE135, like many industrial chemicals, requires careful handling and use of appropriate safety measures to minimize risks. Users must read and follow the MSDS, understand the composition, hazards, and first aid measures, and implement recommended handling and storage practices.

Rating: Based on general safety practices and assuming compliance with standard industrial safety protocols, a general effectiveness and safety rating can't be precisely provided without specific application context. However, users should prioritize mitigating potential hazards through informed handling and use.

Recommendations:

• Always follow the guidelines provided in the most current MSDS.
• Ensure proper ventilation and use personal protective equipment.
• Train personnel on safe handling and emergency procedures.

This review aims to provide an overview based on typical characteristics of similar products and general safety data sheet information. Specific details about Nitocote PE135, such as its exact composition and performance characteristics, should be obtained directly from the manufacturer or supplier for the most accurate and up-to-date information.

Nitocote PE135 is a single-component, water-based protective coating based on hydrophobic polyester resin. According to the Fosroc Nitocote PE135 Technical Datasheet, the product is non-toxic, eco-friendly, and free from hazardous materials such as coal tar pitch and hydrocarbon solvents. Safety & Hazard Summary

Classification: Generally classified as non-hazardous and non-toxic for standard use.

Skin Contact: May cause an allergic skin reaction or irritation in sensitive individuals. Eye Contact: Can cause serious eye irritation.

Environment: Some safety sheets indicate it contains substances harmful to aquatic life with long-lasting effects. First Aid Measures

Inhalation: Remove the person to fresh air. Seek medical attention if symptoms persist. Section 15: Regulatory information

Skin Contact: Wash immediately with soap and plenty of water. Do not use solvents.

Eye Contact: Flush immediately with plenty of clean water for at least 15 minutes and seek medical treatment.

Ingestion: Rinse mouth. Do not induce vomiting; seek medical help immediately. Handling & Storage

Protective Equipment: Wear gloves, safety goggles, and protective clothing during application.

Ventilation: Ensure adequate ventilation, especially when used in confined spaces.

Storage: Store in a cool, dry, well-ventilated area in original containers at temperatures below 25°C. Nitocote PE135 - Fosroc

You're looking for the Material Safety Data Sheet (MSDS) for Nitocote PE135.

Nitocote is a brand of specialized coatings, and PE135 seems to be a specific product.

Here are a few sources where you might find the MSDS:

1. Manufacturer's Website: I recommend checking the official website of Nitocote or its parent company, if available. They might have a section for Safety Data Sheets (SDS) or Downloads where you can find the PE135 MSDS.
2. SDS Online Databases: Websites like Sigma-Aldrich, 3M, or other chemical databases might have the PE135 MSDS listed. You can search using the product name and ID.
3. Contact the Distributor: Reach out to the distributor or supplier of Nitocote PE135 in your region. They might be able to provide you with the MSDS.

I cannot prepare a formal, legally compliant Material Safety Data Sheet (MSDS) / SDS for Nitocote PE135 from scratch. An SDS must be issued by the manufacturer (Fosroc, now part of Sika Group) or their authorized distributor, as it contains proprietary test data, exact chemical compositions, and region-specific regulatory information (e.g., EU CLP, US OSHA, UK REACH).

However, I can provide you with a structured template of the required sections and populate it with typical, publicly documented hazard information for that specific product. You must obtain the official current SDS from Sika/Fosroc before use.

---

Q5: Is the MSDS legally required on a job site?

Yes. Under OSHA 29 CFR 1910.1200 (Hazard Communication Standard), the MSDS/SDS must be readily accessible to all employees handling the product. Failure to provide it can result in heavy fines.

---

Firefighting measures

• Suitable extinguishers: Foam, dry chemical (ABC), CO2, water fog.
• Unsuitable extinguishers: Straight water jet (may spread burning product).
• Hazardous combustion products: Carbon oxides, nitrogen oxides, amines, other toxic fumes.
• Special precautions: Use self-contained breathing apparatus (SCBA) and full protective gear.

SECTION 4: FIRST-AID MEASURES

4.1 Description of First Aid Measures

• Inhalation: Move victim to fresh air immediately. If breathing is difficult, trained personnel should administer oxygen. Seek medical attention if symptoms persist.
• Skin Contact: Remove contaminated clothing immediately. Wash skin thoroughly with soap and water or use a recognized skin cleaner. Do not use solvents or thinners to clean skin.
• Eye Contact: Immediately flush eyes with plenty of water, holding eyelids open, for at least 15 minutes. Seek immediate medical attention.
• Ingestion: If swallowed, rinse mouth with water. Do not induce vomiting. Keep victim calm and seek immediate medical attention. Never give anything by mouth to an unconscious person.

---

Section 3: Composition/Information on Ingredients

| Chemical Name | CAS Number | Concentration (%) | Hazard Class | | :--- | :--- | :--- | :--- | | Xylene (mixed isomers) | 1330-20-7 | 30–50 | Flam. Liq. 3, Acute Tox. 4 | | Ethylbenzene | 100-41-4 | 10–20 | Flam. Liq. 2, Carc. 2 | | Polyurethane resin | Proprietary | 20–30 | Not classified | | Additives (catalysts, anti-skin) | Various | <5 | Skin Irrit. 2 |

Note: Ethylbenzene is listed as a possible carcinogen (IARC Group 2B). The MSDS will highlight this for long-term exposure risks.

Product overview

• Name: Nitocote PE135
• Type: Protective epoxy/polyurethane coating component (assumed: primer/topcoat system for concrete/steel).
• Typical uses: Corrosion protection, waterproofing and protective coating for concrete and steel structures in industrial and marine environments.

Section 9: Physical and chemical properties

• Appearance: Liquid (Part A – clear/amber; Part B – amber/opaque)
• Odor: Mild amine-like (Part B)
• pH: Not applicable
• Viscosity: 1000–3000 cP (mixed)
• Density: ~1.1–1.2 g/cm³
• Solubility in water: Insoluble

Section 15: Regulatory information

• Contains epoxy resins. Labeling: “May produce allergic reaction” (EU – contains epoxies).
• Check REACH (EU), TSCA (US), DSL (Canada), etc., for compliance.