Olivetti Dcopia 4023mf Driver Best • Trusted

Important Note: The Olivetti d-Copia 4023MF is often a rebranded version of a Konica Minolta or Develop model (commonly the Bizhub 223 or similar series). This means the best driver is frequently not from Olivetti directly.

Frequently Asked Questions (FAQ)

Method A: USB Connection

  1. Download the driver package and extract it (unzip) to a folder on your desktop.
  2. Plug the printer into the PC via USB.
  3. Open Devices and Printers in Windows Control Panel.
  4. Click "Add a printer".
  5. Select "The printer that I want isn't listed".
  6. Choose "Add a local printer or network printer with manual settings".
  7. Select USB001 (Virtual printer port for USB) from the dropdown.
  8. Click "Have Disk...".
  9. Click "Browse" and navigate to the folder where you extracted the drivers in Step 1. Select the .inf file (usually named oemsetup.inf or similar).
  10. Select Olivetti dCOPIA 4003MF PCL (or 4023 if visible) and click Next/Finish.

4) Installation: Windows (recommended steps)

  1. Download the correct driver package for your Windows version (32/64‑bit).
  2. Temporarily disable third‑party antivirus if installer warns.
  3. If previously installed drivers exist: open Devices and Printers → remove the device and delete driver package (Print Server Properties → Drivers).
  4. Run the downloaded installer as Administrator and follow prompts. Choose network or USB install as appropriate.
  5. After install, connect USB or add network printer:
    • USB: plug in; Windows should recognize the newly installed driver.
    • Network: Control Panel → Devices and Printers → Add a printer → add by IP (use TCP/IP address or hostname). Select the installed driver if prompted.
  6. Test print and open the scanner utility (TWAIN/WIA) to test scanning.